wire mesh gabion mesh box coated machine

Stone machine net cage gabion mesh machine also known as heavy hexagonal wire netting machine production is hexagonal network of professional equipment, stone cage net machine and its products are widely used in petroleum, construction, farming, chemical industry, heating pipe and other pipe wrapping mesh, fence, residential landscaping, protection, and can also be used to. And hexagonal network can also be used for making gabion boxes, widely used for protection and support seawall, slope, road and bridge, reservoirs and other civil engineering, flood of good material

Stone cage net is made of metal wire woven angular network (hexagonal) cage, using a metal line size is differ according to the size of the tiles. If it is metal coating, hexagonal wire mesh, use the line diameter of 2.0 mm to 4.0 mm wire, PVC coated metal wire braided hex nets if it is, then use the outside diameter of 3.0 mm to 4.0 mm PVC wire. Outline the edge of the line use than the hexagonal wire netting rough a number of lines.                                                                                                                                   The box type stone cage is formed by connecting a large size six angle net, which only needs to be sealed in a cage in the construction.
Applicable material: low carbon steel wire, stainless steel wire.
Knitting method: first plating, after plating the first series, is divided into hot galvanized, electro galvanized, PVC coated etc..
Features: solid structure, flat surface, with good corrosion resistance, oxidation and other characteristics.                                                                                                            
 The specific parameters of the conventional stone cage net machine produced by our factory are as follows:                                                                                                           In addition, I plant the production of horizontal stone cage mesh machine:
Horizontal stone cage net machine is made on the basis of the stone cage net machine, the machine can produce 2.5 meters wide within the stone cage net, the machine cost is low, easy to operate. Is the first choice for the production of small cage mesh.              Small six angle net machine
Hexagonal wire netting machine is the production is hexagonal wire netting of professional equipment, products widely used in petroleum, construction, farming, chemical industry, heating pipe and other pipe wrapping mesh: can also be used for fence, residential and garden greening protection. Flood control of material is also hexagonal wire mesh can also be used for the production of Shilong cage. It is widely used for protection and support seawall, slope, road and bridge, reservoirs and other civil engineering.                                                                                                                  Larger mesh, woven wire diameter larger, from 0.4 - 200 wire. Weaving speed is per hour depending on the mesh size of 60 meters ---300 meters range.                                   Positive and negative twist six angle net machine:
I plant the production of the TZ series of positive and negative twist six wire mesh weaving machine, the current specifications are 1/2, 5/8, 3/4, 1, 1-1/2, 2 and other specifications. The six angle metal products used in the series of positive and negative twist braiding technology, production and loom adapt mesh size specifications. This machine adopts positive and negative twist principle, so don't the wire is made of spring can be shaped continuous operation, improves the production efficiency, has the following characteristics: per minute up to 65 mesh, and according to the raw materials necessary to adjust the speed and reduce breakage rate.
Web wide can be woven 1.1 meters wide width and 2.2 meters wide amplitude single, uniform mesh neatly and at any intermediate position Jiasi and equipped with brake, dynamic linkage, flexible and reliable operation, operator of technology requirements low, automatic lubrication, convenient use, reliable lubrication, sturdy, durable, maintenance is convenient to adjust.
I plant the production of the TZ series of positive and negative twist six wire mesh weaving machine, the current specifications are 1/2, 5/8, 3/4, 1, 1-1/2, 2 and other specifications. The six angle metal products used in the series of positive and negative twist braiding technology, production and loom adapt mesh size specifications. This machine adopts positive and negative twist principle, so don't the wire is made of spring can be shaped continuous operation, improves the production efficiency, has the following characteristics: per minute up to 65 mesh, and according to the raw materials necessary to adjust the speed and reduce breakage rate. Web wide can be woven 1.1 meters wide width and 2.2 meters wide amplitude single, uniform mesh neatly and at any intermediate position Jiasi and equipped with brake, dynamic linkage, flexible and reliable operation, operator of technology requirements low, automatic lubrication, convenient use, reliable lubrication, sturdy, durable, maintenance is convenient to adjust.