Gitzo tripods GLEVEL1 the 1st level Pearl Level Digital SLR camera tripod accessories

Specifications

Magnetic Level triangle Cartesian Product Description Specification: 200 * 200mm Right Angle accuracy: 0.02mm / m indexing error: ≤ 20% of nominal value of China's first fully independent intellectual property rights - the principle of magnetic level meter using magnetic adsorption on metal surface, without holding fixed, reduce labor intensity and human thermal radiation, improve measurement accuracy. This product has high accuracy, fast, intuitive readings, good stability, simple structure, small size, light weight and easy to carry features. At right angles to the magnetic digital level meter display range: 0 - ± 1999 Number of measuring range: 0 - ± 500 Number Resolution: 0.005mm / m Indication error: ≤ (1 + A/50) digital circuits, Germany sensor, large screen high precision, speed, intuitive readings stability, light weight, easy to carry a level of standard works tube is made of glass, standard pipe wall is a curved surface with a curvature radius of the tube interior liquid, when the level meter when tilted, the standard tube bubbles rise to the level meter moving end to determine the horizontal position. The larger the radius of curvature of the inner wall of the tube level, the higher the resolution, the smaller the radius of curvature, the lower the resolution, and therefore the radius of curvature of the tube determines the level of precision level meter. Uses magnetic level meter is mainly used to test a variety of tools and horizontal position of the workpiece flatness, straightness, squareness and equipment installation, etc. Especially when measured vertical, horizontal magnetic adsorption analyzer can work in a vertical plane, without artificial support, reducing the labor intensity, avoid the body heat radiation brings a level of measurement error. Specifications of the company's underside and side magnetic level meter length is 200mm rectangular-shaped structure, the accuracy is generally (0.02-0.025) mm / m, if you have special requirements can be customized individually. Restructuring of the company's zero level meter structure is unique, compared to more conventional structure: 1 zeroing easy. (2) After adjustment, zero is not easy to change. As shown in Figure 1. When Level V-groove bottom surface of the mandrel rotation around 5, if the bubble moves, can be achieved by adjusting the screw 2 requirements, the factory has been adjusted, generally unchanged. Use a level scale values angle (s) or slope to indicate that it is the meaning of the bubble lattice work offset a tilt angle of said offset a grid or a bubble in one meter long work surface