Multifunctional pp pleated filter cartridge for water filter filtration equipment for wholesales

1,RUNLAN pp pleated filter cartridge for water filter

Filter is suitable to install 10 "~20" size cartridges, including  solution spray, glass fiber and other materials. The top of the filter is equipped with a NPT3/4 "inlet and outlet

Performance feature>> 

no need to dismantle pipe when replace cartridge

easy to dismantle and low maintenance cost
using casting structure, low cost, reasonable structure
easy to mass production
cartridges use double open , two end fixed

2,RUNLAN Welding single cartridge filter  

RUNLAN SGD-II series filter can be assembled with a micro porous filter (optional 5to 40 inches in length) of different specifications, according to the material, pore diameter and different length, can achieve different flow. Design of sanitary structure, can be applicable to the pharmaceutical, food and beverage industry and other special.

The filter cartridge is connected with the general form of the 226 or the thread.
Pressure gauge can choose general pressure gauge or diaphragm pressure gauge. Each has to undergo a rigorous inspection and pressure test before shipping.

3,RUNLAN stainless steel cartridge filter

Filter use reasonable fluid mechanics technique in accordance with the ASME "U, GB150-1998<" steel pressure vessel "HG532-91" > chemical pipe filter design, manufacturing, inspection and acceptance.
RUNLAN welding filter has 1900 kinds of forms for selection and more than 18000 enterprises filtration solution experience.

4, RUNLAN MMP-I series PP fold cartridges

RUNLAN MMP-I series cartridges enables high precision and low cost filtration to become a reality, the filtering media from USA and Japan ensures the high interception efficiency. The characteristics of high velocity and high assimilative capacity makes MMP series cartridges be the most economical as pre-filter, widely used in various fields of electronic, pharmaceutical, chemical, food and beverage etc.

Product introduction

MMP-I economical and high precision cartridges.
MMP-II long-life polypropylene cartridges.
MMP-III ultra high assimilative capacity of polypropylene cartridges.
MMP-IV absolute accuracy Polypropylene cartridges.

cartridges parameters

5, RUNLAN TFEG-II series PTFE fold cartridges    

Liquid sterilizing cartridges for complex conditions
Imported from Japanese hydrophilic PTFE membrane is used for direct filtration without pre wetting .The product has excellent corrosion resistance, oxidation resistance ,organic solvents resistance, it can filter all kinds of corrosive liquid. particularly suitable for particles removal and sterilization filtration of the chemical reagents, high purity reagents, corrosive liquid, oxidizing liquid.

cartridges parameters

6,RUNLAN  Multi-cartridges filter

RUNLAN with research and development experience and technology for many years accumulated in membrane process uses the technology and the most advanced production equipment  to provide various kinds of high performance, high quality micro porous membrane filtration system for customers worldwide.

Filter uses reasonable fluid mechanics technique, in accordance with GB150-1998 < steel pressure vessel during water treatment equipment design, manufacture ,inspection and acceptance >.

Safe operating temperature and pressure will depend on elements and sealing ring if greater than the pressure and temperature, please noted in particular.
Acceptance criteria: design and manufacture of steel pressure vessel, water treatment filter criteria, "U ASME".
Surface treatment: mechanical polishing, electrolytic polishing, sand blasting, painting.  

7,RUNLAN Micro porous membrane filter

RUNLAN micro porous membrane liquid filter is a kind of multi function filter, which is composed of housing and cartridges. widely used for  Solid-liquid separation of petroleum, chemical, machinery, metallurgy, textile, printing and dyeing, electroplating, medicine, food and other industries.

As shown, filtering liquid flows in from the filter inlet , from the outside to inside through cartridge then the clear liquid come out through the outlet. Impurities are trapped in the deep and surface of cartridges, so as to achieve the purpose of filtration.

Safe operating temperature and pressure will depend on the cartridges and the sealing ring, please note if pressure and temperature is greater than above mentioned.
Acceptance criteria: design and manufacture of steel pressure vessels, water treatment filter criteria, "U ASME".
Surface treatment: mechanical polishing, electrolytic polishing, sand blasting painting.

8,RUNLAN Sanitary cartridge filter

RUNLAN Sanitary filter housing adopts high quality 304 or 316L stainless steel material, after strictly material chosen each filter is carefully manufactured and ensures no crack streamlined design. The filter has good surface and the maximum corrosion resistance, in order to prevent the quality standard of bacterial contamination, Sanitary level filter housing is unique structure, the inner and the outer surface of each housing are no dead angle, which can be completely washable, easy to operate.

Inside & outside surface treatment
Inside surface: Mirror polishing or electro polishing process.
outside surface: Matte processing, polishing and electrolytic polishing.

Filter materials
housing material:304 or 316L
sealing ring: Food grade silicone rubber, fluorine rubber seal ring, PTFE

Technical parameters
Lock way: hoop ,sanitary pipe or bolts fast open and close
Max pressure:25kgf/cm2
Max temperature:80℃

9,RUNLAN High flow filter

TM-D series high flow fine filter uses the high quality cartridges, combined with years of industry experience to design and manufacture, maximizing the flow in the compact system design, compared with the traditional filtering systems, D series large flow filter has more advantages.

High flow
D series filter adopts unique design, so that a single cartridge flow rate is up to 50T/H. therefore only need less cartridges also can meet your flow requirements.
using fewer cartridges can reduce the size of filter housing. Based on the specific flow rate, compared to competitive housing , large flow filter space is only half of the other filter housing. Therefore, the investment cost is lower, at the same time compact system design saves valuable space in the factory.

Cartridges parameters
60″50T/H flow rate can reach up to 50T/H
40″80T/H flow rate can reach up to 80T/H
Accuracy range: 1, 2, 5, 10, 15, 25, 40 and 70 Micron
Filtration efficiency:99.9%
Material is through the FDA certification

TM-D series
Large flow filter with special design, can realize the system flow requirements in compact space. The housing we provide are standard design, at the same time can also be customized to meet your specific needs. The design and manufacturing of all the filters can meet the GB150 standard .
Stainless steel filter surface is treated by polishing; carbon steel housing is treated by sand blast protection.

10,RUNLAN Liquid-liquid separation

RUNLAN SGF Liquid-liquid separator is commonly used in gasoline, jet fuel and diesel oil -water separation; caustic gasoline, jet fuel and diesel oil caustic alkali separation; water separation of light hydrocarbon and petrochemical products; separation of hydrogen peroxide in working mother liquor; acid separation of petrochemical products and hydrocarbons ; oil separation; anhydrous amine oil separation.

SGF-A oily water separator
In the oil-water separation process shell is equipped with coalescence cartridges and separation cartridges, when the medium flows through its internal then there will be four processes-filtration, coalescence, settlement, separation, so as to realize the removal of moisture, medium alkali and organic acid salt soluble in water and etc.
Media first from the inside to the outside flows through the coalescence cartridges, this cartridges has a special double function of filtration and coalescence, High precision filtering layer of innermost coalescence cartridges can effectively block the particle impurities, especially intercept impurity which has emulsification stability state such as iron oxide and iron sulfide etc. also better for subsequent demulsification and coalescence function, After filtering medium will flows into coalescence demulsification layer, its’ special material can do demulsification then fine and free water will form large drop, Large drops will sink by its’ gravity, smaller size drop will flow with media into separation cartridges, Separation cartridges is made by the patent technology materials with good hydrophobic performance. when the medium from the inside to outside flows separation cartridges, only let media pass by, small droplets are completely effectively intercepted by cartridges outside then coalesce into large drops thus further separated off water.

RUNLAN Cartridges
Coalescing and separating cartridges
He coalescence cartridges is mainly made by surface treated glass fiber or polyester fiber, special design structure makes cartridges good coalescence performance.Removal rating can be up to 0.1μm

Separation cartridges
The separation cartridges is made of high density gradient glass fiber, in order to reduce breakage and leakage, design into the whole single tube structure, cartridges surface is treated by hydrophobic and oleophobic and meet various requirements of micron rate.

Parameters:
Shell material:20#,345Q,Stainless steel
Micron rating range: less than 0.3 micron,0.3 micron,0.5micron,1 micron,5 micron,10 micron
Cartridges size: OD3.5’’.4.5’’.6’’; Lenght16,18,20,32,36,40,72’’
Initial pressure drop: ≤50bar
Changeable pressure drop: <150Bar
Operating temperature: 0~120℃

Structure
Liquid-liquid coalescence separator is equipped with two group of different functions cartridges in internal; separator housing is metal housing and equipped with lever gauge, pressure gauge ,vent valve, drain valve, online sample joints and other accessories.

Process flow
1. in order to extend the coalescence cartridges’ service life and improve the dewatering efficiency, recommend to add a pre-filter in the front of coalescence filter separator . The main purpose of pre filter is used to remove medium large impurities and solid particles of iron oxide, iron sulfide and other harmful impurities.
2. Each device is designed with a bypass, convenient in replacement cartridges, then ensure the system work continuously.
3. There are 3 drain on the bottom of each equipment which is conducive to the dirt removal and impurity separated recovery .

11, RUNLAN Folded cartridges filter   

Cascading Filters in food and beverage filtration applications have a very long history,this filtering method is applicable to deep bed filtration technology,modular closed system,especially for smaller or medium-sized traffic flow.Virtues stacked filter can be applied to international brand cake and low cost.Surface treatment fully meet the sanitary requirments.

Description
1.Technical characteristics
2.Design pressure:1.0Mpa
3.Opearting temperature:0-110℃
4.Material:Stainless steel SS304 or SS316L
5.Finish:mirror polishing or electrolytic polishing

Typical application
1.Alcohol,syrup,beer microorganisms and soild was filtered
2.Juices and juice concentrates terminal filtration before filing
3.Pre-filtered juice filtration membrane
4.Wine,enzymes dissolve the liquid gum,olive oil clarification and filtration
5.Pharmaceutical,chemical,electronic filter

Main parameters

12, RUNLAN Filter with fluorine lining  

RUNLAN owned subsidiary of Wuxi innovative Anticorrosive Equipment Co. Ltd is a company with decades anticorrosive experience filtration supplier.
E-CTFE (Halar), ETFE (Teflon), FEP (Teflon), PFA (Teflon) and modified PTFE and partially fluorinated or perfluorinated polymer materials, may be processed by hot plastic forming method, whatever for almost all organic and inorganic compounds ,either acid or alkaline, have very high resistance. These materials show generally enduring patience for acid, alkali, solvent and chloride

RUNLAN at present has coating materials for processing as below:

13, RUNLAN SSZ series stainless steel fold cartridges

RUNLAN SSZ series folding cartridge is made of stainless steel wire mesh or stainless steel fiber sintered felt by welding with high porosity, Excellent mechanical properties and resistance to high and low temperature performance and chemical stability, which is suitable for high flow filtering, steam filtering, a variety of high and low temperature gas-liquid, high precision and strong corrosive fluids, also can be repeated washing, backwashing ,back blowing.
The folding process, high capacity, filter area is 4 times than common cylindrical cartridge.
withstand high reverse flow.
Repeated cleaning.
Without any additives, conform to the GMP standard

Specifications

Flow rate
Regarded water as the unit, refer to 10″and 70 Mbar pressure drop

The following table represents typical water flow at a one psi (69 mbar) pressure differential across a single 10 inch pleated cartridge element. The test fluid is water at ambient temperature. Extrapolation for housings with multiple elements and higher pressure drops is acceptable, but as flows increase the pressure drop of the housing becomes more apparent. For 10 micron and above, the recommended maximum flow rate per 10” is 7 –8 gpm for maximum service life.
Pressure
Special design can make the cartridge withstand up to 400KG working pressure, anti pressure30Kg.
Micron rating
Absolutely accuracy 3-200μm ,liquid as the unit.

14, Runlan company capacity 

Runlan provide a wide range of filter and filter system for oil production, processing; mining processing, liquefaction, transportation in natural gas industry around the world,used to remove pollutants in liquid or gas. With 18000 companies service experience in worldwide, leading filter laboratory, strong manufacturing capacity, we can provide you with excellent reliability and high performance products.
Runlan all gas filtration and separation products are available with ASME "U" seal "U2", we can also accept BureauVeritas, TUV third-party certification.