Home > Products > Rigid foam system for refrigerator insulation > Refrigerator Foam
Refrigerator Foam
- Shanghai
- T/T
You May Like
-
Refrigerator Polyurethane Foam
-
Rigid Polyurethane Foam System for Refrigerator Insulation
-
Polyurethane Resin System for Refrigerators
-
Flexible Polyurethane Foam System for Wall Injection Insulation
-
Shanghai Dongda Polyurethane Rigid Foam System for Refrigerator and Freezer
-
Polyurethane Material for Refrigerators
Product Details
| CAS No. | 9009-54-5 | Place of Origin | Shanghai, China | |
| Type | Other | Brand Name | Dongda | |
| Model Number | DJD-103 |
Product Description
Specifications
refrigerator foamgood flowability
good low-temperature dimensional stability
Products Introduction
Rigid Polyurethane blend polyols foam system for refrigerator and freezer
DJD-103 blend polyols use CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1.excellent flowability, the density of the foam is well-distributed, and the thermal conductivity is low
2.excellent low-temperature dimensional stability and good cohesiveness;
3. demould time is 6-8 minutes.
Physical Properties
Appearance Hydroxyl Value mgKOH/g Dynamic Viscosity (25 °C) mPa.s Gravity (20 °C ) g/ml Storage Temperature °C Storage Stability month | pale yellow transparent viscous liquid 360-420 3000-4000 1.06-1.08 10-25 6 |
Recommended Ratio
pbw | |
DJD-103 blend polyols CP or CP/IP Isocyanate | 100 12-14 136-142 |
Technology and Reactivity(the exact value varied depending on processing conditions)
Manual Mixing | Mechanical Foaming | |
Raw Material Temperature °C Mould Temperature °C CT s GT s TFT s Free Density kg/m3 | 20-25 35-40 12-16 75-85 100-120 25-26 | 20-25 35-40 8-12 50-70 70-100 24-25 |
Foam Performances
Foam Density by Molding Closed-cell Rate Thermal Conductivity (15 °C) Compressive strength (perpendicular to the direction of rising) Dimensional Stability (24h, -20 °C) (24h, 100 °C) | GB/T 6343 GB/T 10799 GB/T 3399
GB/T 8813 GB/T 8811
| ≥35kg/m3 ≥90% ≤22 mW/(m.K)
≥150kPa ≤0.5% ≤1.0% |
The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.
DJD-103 blend polyols use CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1.excellent flowability, the density of the foam is well-distributed, and the thermal conductivity is low
2.excellent low-temperature dimensional stability and good cohesiveness;
3. demould time is 6-8 minutes.
Physical Properties
Appearance Hydroxyl Value mgKOH/g Dynamic Viscosity (25 °C) mPa.s Gravity (20 °C ) g/ml Storage Temperature °C Storage Stability month | pale yellow transparent viscous liquid 360-420 3000-4000 1.06-1.08 10-25 6 |
Recommended Ratio
pbw | |
DJD-103 blend polyols CP or CP/IP Isocyanate | 100 12-14 136-142 |
Technology and Reactivity(the exact value varied depending on processing conditions)
Manual Mixing | Mechanical Foaming | |
Raw Material Temperature °C Mould Temperature °C CT s GT s TFT s Free Density kg/m3 | 20-25 35-40 12-16 75-85 100-120 25-26 | 20-25 35-40 8-12 50-70 70-100 24-25 |
Foam Performances
Foam Density by Molding Closed-cell Rate Thermal Conductivity (15 °C) Compressive strength (perpendicular to the direction of rising) Dimensional Stability (24h, -20 °C) (24h, 100 °C) | GB/T 6343 GB/T 10799 GB/T 3399
GB/T 8813 GB/T 8811
| ≥35kg/m3 ≥90% ≤22 mW/(m.K)
≥150kPa ≤0.5% ≤1.0% |
The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.
Contact Us
- Shanghai Dongda Polyurethane Co., Ltd.
- Contact namePan Li Chat Now
- Phone86-21-57248959,15900416162
- AddressNo. 307, Shanning Road, Shanyang Town
Product Categories
New Products
-
Rigid Foam System for Water Heater
-
Blend Polyol for Discontinuous Panel
-
Polyurethane Foam System for Solar Energy
-
Polyol Blend for Low Pressure Solar Energy Water Heater
-
High Pressure Solar Energy Polyurethane Blend Polyols
-
Rigid Foam System for Solar Energy
-
Polyurethane Foam System for Solar Energy
-
Blend Polyols Polyurethane for Solar Energy Water Heater Made of Rigid Foam Polyether
-
Blend Polyols Polyurethane for High Pressure Solar Energy Water Heater Made of Rigid Foam Polyether
-
Blend Polyether Polyols for Discontinuous Panels
-
Polyurethane Resin Spray Insulation System
-
Rigid Polyurethane Systems for Spray Foam Insulation
Popular Searches
- masterbatch
- flame retardant masterbatch
- calcium masterbatch
- plastic masterbatch
- container desiccant bag
- color masterbatch
- lightweight eva
- foam roll eva
- black masterbatch
- masterbatch color
- white masterbatch
- caco3 filler masterbatch
- filler masterbatch
- plastic red masterbatch
- masterbatch filler
- plastic color masterbatch
- black color masterbatch
- plastic filler masterbatch
- blue masterbatch
- red masterbatch
- pet raw material
- pvc raw material
- pom plastic
- master batch pp
- master batch
- master batch compound
- tpu material
- abs plastic sheet
- abs sheet
- master batch pellet
Recommended Products
- PA6 Pellets Gf30 Good Electrical Performance With Flame Retardant UL V0 Nylon 6 for Spools, Connectors Electronic Appliances
- Engineering Plastic Pa6 FR V0 Gf30% Glass Fiber Filling Good Mechanical Performance PA6 Granules Nylon 6 for Home Appliances
- Made in China Nylon 6 30% Mineral Filler Modified PA6 Plastic Granules Black V0 Polyamide 66 Fibers PA66 for Switches
- Factory-Low Price Reinforced Nylon 6 Granule PA6 GF30 Resin 30% Polyamide 6 and Glass Fiber Natural Color Nylon PA Resin PA6
- Virgin Black PA6 GF30 Resin Engineering Plastic Injection Grade Nylon 6 Used Polyamide 6 for Injection Molding Applications
- Virgin Polyamide/PA6/GF25 PA66 Plastic Resin Granulesflame Retardant UL94 V0Nylon 6/66 Fibers for Instrument Components
- Affordable Nylon PA6 UL94 V0 Resin Thermostable Wear-Resistant Raw Material Granules FR Pellet PA6 for Structural Component
- Factory Sell Vrigin PA6 Glass Fiber 25% Heat Aging Resistance Wear Resistance FR V0 V1 V2 Nylon 6 for Power Tool Handle
- Black Polyamide 6 GF30 Heat Stability Raw Material Modified Virgin Nylon6 GranulesPolyamide 6 Used for Electrical Connector
- High Quality Nylon PA6 Toughened Grade FR V0 Raw Material PA6 Granules Polyamide 6 Pellets for Plastic Industry-Plastic Gear
- Natural Polyamide 6 Recycled Resin Easy-to-Demould PA6 Nylon Plastic Raw Material Grade Molding Particle Toy Accessories
- Wear-Resistant Polyamide 6 Raw Material Nylon6 Plastic Particles for Landscape Industry PA Products
Find Similar Products By Category
- Chemicals > Plastic & Polymer > Polymer & Resin
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Pan Li
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile