Professional Manufacturer Electrical Vibrating Feeder for Sand

Electrical vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gearsare jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to producea linear huge power which forces the feeder to vibrate. Through the vibration,the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the furthercrushing, so screening purpose can be reached.

Features and Benefits

Electrical vibrating feeder is mainly used for the massive, granular and powdered materials, from the storage warehouse or funnel to the homogeneous continuous or quantitative loading device, has small volume, light weight, easy installation, no moving parts, without lubrication, easy maintenance, high operating frequency, low power consumption advantage.Widely used in mining, metallurgy, coal, light industry, electric power, chemical industry, food, etc.

             ISO                       Q&C                        Brand           BUSINESS LICENSE

We provide 12months quality warranty to make sure your machine well runs consistently.

Pre-sale services:

a. Professional engineer design the production line for you

b.Recommend suitable equipment according to your special demand.

During-sale services:

a.Pre-check and accept products before delivery

b.Send technicians to the jobsite for guiding the installation and adjustment

c.Training operators and finishing the check to satisfy your requiremnet

After-sale services:

a.Common problem can be solved through web in 24 hours,complex problem can be reacted immediately in 24 hours and solved as soon as possible

b.To establish long-term friendship, we will regulary contact with our customers.

Conditions of the use of electrical control devices:

a. Elevating height is not more than 1000m

b. The temperature of surrounding medium is less than -20 ℃ ~ +4 ℃.

c. When the temperature of surrounding medium is 25 ℃, the relative humidity

is not more than 85%.

d. Around there is no medium of serious corrosion and affect electrical insulation properties.