DC micro brushless thermostability water pump

Model: TYF1606302

1 rated voltage: DC12V

2 the use of the voltage is best not to overpressure.

3 no load current rating: 0.15A

4 no load water volume: 280L/H

5 head: 12V specifications head 2.2 meters

6 load rated current:.0.35A

7 use: diving, land use can be

8 noise: MAX 30dB (background noise 40dB, 0.5M or less)

9 use fluid: tap water, ground water, sea water,

10 water temperature: -20 degrees ~90 C degrees C

11 ambient humidity: 45% ~ 90%

12, continuous use of the working life of 20000 hours or more

13, motor; brushless motor

14. Weight: 40g

Advantages of Brushless DC pump (new type magnetic separation pump)

Magnetic pump is a kind of through the magnetic force transmission to achieve transmit torque contact, thus to static seal instead of dynamic seal, the pump to complete, to solve the "run, take, dripping, leakage" problem, eliminate the refining and chemical industry, flammable, explosive, toxic, harmful medium through the pump seal leakage security risks, effectively ensures the health and safety of workers.

Compared with the motor brushless DC pump, magnetic pump has the following advantages:

1 pump shaft from the dynamic seal into a closed static seal, completely avoid the leakage of the medium can be amphibious, and completely waterproof.

2 no independent lubrication and cooling water, reduce energy consumption.

3 small power consumption, high efficiency, and has a damping vibration damping effect, reducing the vibration of the motor on the pump and the effect of pump cavitation vibration on the motor.

4 overload, the rotor will slip on the ceramic shaft, the motor, the pump has a protective effect

5. No brushless DC pump used for electronic components, without the use of carbon brush commutation, adopts the wear resistance of high precision ceramic shaft and graphite sleeve, sleeve and magnets by injection are connected as a whole is to avoid the wear and tear, so there is no brush DC magnetic force pump life has been greatly enhanced. Magnetic force isolation pump section of the stator and rotor are completely isolated, stator and the circuit board with epoxy resin potting, 100% waterproof, part of the rotor with permanent magnet and the pump body by environmental protection material, low noise, small volume, stable performance. Can through stator winding regulation all the required parameters can be wide voltage operation.

Advantages: long life, low noise up to 35dB below, used for hot water circulation. The stator and the circuit board part by epoxy resin potting and completely isolated from the rotor can be installed underwater and completely waterproof, the axis of the pump with high performance and precision steel shaft, high precision, shock resistance.