MDF Door Skin--Bottom Cylinder--1200T 4*8 Hot Press Machine

Specifications

• The main technical parameter of 1200T 4×8 feet single hot pressing (Bottom cylinder)

   

  1, Total pressure: 1200KN

  2, Size of heating plate: 1400mm×2600mm

  3, Cylinder diameter and quantity: 320mm×6

  4, Power: 18.5kw+22kw

  5, Max. working stroke: 200mm

  6, Max. working pressure: 24.8Mpa

   

   

   

  Be widely used for molding the MDF skins up-set cylinder keep the fast drop speed, shorter the board waiting time, improve the quality of skins.
• By using Synchronizer to make the mold close&open in same time.
• Additional guide system can reduce the friction of the mold , make the mold life longer and keep mold in good working position. 

Note :

1. Non-standard product which is made for the special requirement of subscriber is not listed.

2. If there is modification of the table ,we will inform by other means.

3. If the product you see is not the same with the pictures, the product will be regarded as standard.

Automatic production line

The Standard automatic production line

Fast-type presses automatic production line

More Products for You to Choose

Company Show 

About us

Product superiority

     1.An aging treatment: We finished the main frame after welding pressure after aging treatment, 

eliminating the uneven internal stress, significantly improving the life of the press frame.

     2.Frame agencies: Internal press now part of the internal stress concentration occurs before is 

cut directly after grinding, edge stresses are concentrated easily damaged, and now as CNC machining 

centers and milling the surface is very smooth. The improved strength and increased fatigue life, make 

life more durable frame.

     3.Heat pad: We use an internal temperature of polymer insulation panels instead of epoxy boards, 

pressure, heat index was significantly improved, so that insulation pad life expectancy, thus extending 

the life of the cylinder.

Certifications

Customers

Our Markets

Contact