PQS-Perfect Quality Pqs Car Lifter

Working principle
A mechanical device for transport vehicles to enter the parking lot underground or upstairs is used to replace the ramp, its working principle is the same as that of elevator. When parking car, press the call button of the lifter special for automotive, the lifter will run automatically to the destination layer and then its door will open automatically; when the car enters into the lifter, press the floor selector button, the door will be automatically closed and then open after entering the parking layer. The car is driven out of the lifter to the parking space, the process of parking car is complete, Conversely for the picking up process.

   In the lift car, floor select button, self-leveling / automatic door
Notes:
1.    The landing door is set as required, which should not be set at the sides of the no-vehicle exit, and the door hoistway should change into closed type
2.    When the machine room is away from the hoistway, there should be a 200m*200m channel connected with the well above the ground of the machine room
3.    If the height interval between the two standard in-out boards is over 10mm, there should be an emergency exit with 0.6m width and 1.2m height set in the interval
4.    Driving mode: Hydraulic driving
5.    It is the foundation drawing about hydraulic elevator
6.    Mechanical standard unmanned automotive elevator can be designed as required