Bag Filter Dust Collector

Specifications

Bag Filter Dust Collector
1.High efficiency
2.Low noise
3.CE&ISO9001

Detailed Product Description:

1. Ensure isotonic and equate quantity blowing; 

2.Testing system of unit structure filtration bag detects broken bag any time

The dust collector, a kind of medium-sized and small de-dusting device, features compact structure, reliable operation and convenient installation and maintenance. The dust gas enters the dust collector from the bottom and flows through diffluence device, where the dust grains are separated into the dust holder. Then the gas flows into the upper filtration bag equably to separate the grains contained in the gas. The purified gas is discharged from the upper of the dust collector.
This dust collector is equipped with a de-dusting device of low consumption, which can clean all kinds of felt filtration bags of 2m, 2.5m and 3m with low pressure and short pulse blowing, achieving efficient and satisfactory effect, is ideal equipment for dust cleaning in all industries.

Working Principle:

The dust-laden air enters the bag filter bustle.

The air is uniformly distributed avoiding channeling.

Initially a coat of material forms on the bags. Subsequently, the coat acts as the filtering medium.

The dust is accumulated on filter elements while the air passes thorough the filter bags from outside to inside.

The accumulated powder is dislodged from the bags by reverse pulse-jet air intermittently.

The dislodged powder falls on bottom cone and is discharged through powder discharge valves.

The dust free air is sucked by induced draft fan and is exhausted to atmosphere.

Knockers are provided on conical portion especially for sticky/hygroscopic materials.

Features:

- Better performance

The pressure drop across bag filter is very low (40 - 100 mm WC) even for continuous operation. This results in reduced power consumption of fan.

Movement of air from top to bottom aids in removing powder from bags eliminating the possibilities of dust re-entrainment. This results in low-pressure drop and precious energy saving.

Anti-stick coat on bags facilitates removal of powder avoiding chocking of filter bags.

Automatic air pulse jet system with adjustable sequential timer to clean filter bags on-line.W

Bottom cone angle of housing is 450 hence powder slides freely down.

- Ease in maintenance and long life

Bag removal from top facilitates maintenance in dust free atmosphere.

The bag cage has 16 wire rods for better support to bag that improve bag life.

Aluminum di-cast heavy wall thickness machined venturies for distortion free and leak free performance. Heavy wall thickness renders long life.

- Safety Instrumentation and Alarm

Fully automatic temperature controlled Cold Air Bleeding system to limit air inlet temperature to protect the filter bag fabric.

Differential pressure switch across bag filter is provided to know if bags are chocked.

Vacuum pressure switch is provided to protect the housing and bags from collapsing under vacuum.

Compressed air pressure switch is provided on pulse jet cleaning system to ensure sufficient pressure is available for proper cleaning of filter bags online.