Schneider Electrical WYQ24 Angle Iron Bending Machine With CE

1. Standard Equipment:                                                                        

• Plate Support Arms
• Germany Bosch-Rexroth Hydraulic
• Germany EMB Tubing connector
• Germany Siemens Main Motor
• Tele mecanique/Schneider Electrics
• Hydraulic &Electrical overload protection
• Top and Bottom Tooling(86°,R0.6mm)
• Safety Standards(2006/42/EC):

2. Safety Equipment:                                                                        

1.EN 12622:2009 + A1:2013          2.EN ISO 12100:2010      3.EN 60204-1:2006+A1:2009

• Front finger Protection(Safety light curtain)
• South Korea Kacon Foot Switch(Level 4 of safety)
• Back metal safe fence with CE standards
• Safety relay with Monitor the pedal switch and safety protection

Watch Video on Youtube

https://youtu.be/0VwcoqJ7FXQ

1. This section bending machine is high-efficient process equipment used to bend angle steel, channel steel, I-steel, flat steel, side steel, round steel and so on. One time feeding can complete rolling round and corrective round working procedure, it is widely used in the petroleum, chemical industry, water and electricity, shipbuilding and machine manufacture and other business lines.
2. Upper roller of the machine is main drive roller with support rollers set on the two sides. It’s controlled by the electrical equipment, half hydraulic pressure drive.
3. This machine which is of advanced structure, reliable operation and complete in function is sophisticated Profile form equipment in domestic and abroad.

 Watch The Details on Youtube

https://youtu.be/0VwcoqJ7FXQ

Check Our Packing Video on Youtube

https://youtu.be/8cmx2DUqKV4