HIGH QUALITY PVC BUILDING Board TWIN EXTRUDER

Specifications

The only professional manufacturer in PVC twin EXTRUDER China

1.SJSZ 80/156 Conical twin Screw Extruder

ABB frequency converter, SIEMENS contactor, OMRON Japan

2.Calibration unit

calibration plate:1500mm×500mm  4couples

3. Cooling tank and bracket

length:6000mm

trimming knife:3 sets

4. Haul-off unit

8 couples

cylinder clamping and loosening

5. Cutting unit

6. Stacker

 7. Mould (T-Die )

PVC/WPC boards are available with various names like ‘Construction boards’, ‘Crust foam boards’, ‘Calcium boards’, ‘WPC shuttering boards’ ‘WPC MDF boards’, WPC Plates, PVC foam boards, WPC sheets, WPC panels, WPC formwork panels etc. in global markets. WPC boards can be produced with flexible density range varies from 400 kg/cum to 900 kg/cum. Another important characteristic is the surface density of this product and which also can be adjusted between a range of 55 shore D to 85 shore D surface hardness. 

Formulations play a major role in making PVC/WPC boards and that is the master key which allows it to be known by different names as above. SANYI PLASTIC MACHINERY provides formulation services as well as manufacture readymade compounds for WPC boards. Saw mill dust, wood powder, Virgin & recycled plastics and additives are key components for making these composite boards.

These boards are covering a large application area starting from interior grade boards being used for making furniture, kitchen cabinets, kitchen shutters. Taking further, these boards are being used for making temporary shelters for government housing projects, construction site pavilions/shelters, low cost housing projects and other road and building projects.

Importantly in comparison to conventional plywood and MDF boards, WPC board doesn’t need a compulsory lamination for end user applications. These boards can be directly applicable with beautiful and technical harden surface properties in compare to even high pressure laminate applied surfaces. Versatile product thickness ranges from 3 mm to 20 mm and various colors can be made available for variety of direct applications again. These solid or plain colored WPC boards are surely replacing the product coated with HPL .

 Pre-sale service:
To provide information and market research,to provide consultation,to provide many kinds of conveniences and market service,etc. Products: PVC Foam Board Machine...
The main purpose of pre-sales service is to help customers make the project planning and system requirements analysis. Make our products maximum to meet clients’ requirements. Also play the greatest overall economic benefits of customers’ investment.

 After-sale service:
To install products and test products freely for customers.
To provide the formulas and technologies of relevant products and the information of chemical materials manufactories.
To direct technology aspect of relevant use according to customers’ requirements
To provide technical training for clients’ employees.
To be responsible for maintenance service, door-to-door service under the necessary circumstance.

Technology support:
To provide installation and test for the C twin EXTRUDER

To provide formulas and technology of relevant products.
To provide information of chemical material manufactories.
To provide technical training for clients’ employees.

We are sure any of your requirement on PVC twin EXTRUDER will get prompt attention.