Cisco console USB and RJ45 cable

Product Features:
1.The RJ45 connector can also be adapted to DB9 via RJ45-to-DB9 adaptors.
2.This USB cable has an embedded FTDI 232 and RS232 level shifter to produce true RS232 levels.

( Chipset: FT232RL+ZT213)
3.USB to Serial cable, RJ45 presentation and pinouts for direct connection to Cisco and other network equipment serial console ports.
4.Pinouts for this cable RJ45 end are:
Pin1=CTS
Pin2=DSR
Pin3=RX
Pin4=Ground
Pin5=Ground
Pin6 = TX
Pin7 = DTR
Pin8 = RTS
5.Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS.
6. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity .
7.Supports hardware flow control used to implement the CISCO break sequence
8. USB 2.0 Full Speed compatible
_____________________________________________________________________________
Benefits:
1.No more cables & adapters to buy and/or make to get it working
2.No more DB-9 Adapters
3.No more Mickey Mouse Prolific driver problems
4.No more fake Prolific chips
32 and 64 bit operating systems are both supporter

This cable is great for use with wireless to serial adaptors such as the Airconsole Serial Adaptor, or with PC and Mac. The cable is practically identical to the 30cm cable bundled with Airconsole, but this cable is 180cm in length so suitable for use with in comms room as long enough to reach equipment in the rack from a laptop, or for placing your Airconsole in a better position for WIFI reception.