SJAT-2 Cement Bond Combination Tool 110VDC 70mm OD High voltage, low current and little signal attenuation

according to the requirement

Features

 1. The tool consists of three parts, that is, CCL (casing collar locator), natural gamma ray tool and dual-transmitter-three-receiver sonic cement bond tool.

 2. kinds of logging signals (CCL signal, gamma signal and cement bond acoustic signal) acquired by combination tool will be transmitted to surface logging system via mono-conductor cable.

3. High voltage, low current and little signal attenuation.

4. Multiple curves such as natural gamma, CCL, 2.5-inch sound amplitude and time difference, 3.5-inch sound amplitude and time difference, bond index, and variable density can be obtained.

5. The tool is characterized by multiple test parameters, high self-compensation capability and high success rate of logging.

SJAT-Ⅱ Cement Bond Combination Tool

Technical Specifications

 1.Maximum working pressure-100Mpa

 2.Maximum working temperature--150°C

  3.OD---Φ70mm

4.Working voltage (at the cable gland)--110VDC

 5.Working current:
     CCL/remote sensing cylinder/ Natural gamma ray tool --43mA
     Sonic cement bond tool-- 42mA

 6.Logging Speed: ≤700m/h   recommended speed:600m/h

7.Natural gamma background counts:≥160cps

 8.Gamma error band of ebb and flow: ≤7%

9.Length:
Upper Centralizer--790mm
CCL/ remote sensing cylinder / Natural gamma ray tool ----1470mm
Sonic cement bond tool -2800mm
Lower centralizer --790mm