API 11B Sucker Rod

Standard Package or as your requirement

     API 11B Sucker Rod   

Steel sucker rod is one of the important equipment in oil field. Sinotai can provide sucker rods including grade C, K, D, KD, HL, HY and KH. Among them, grade C, K, D sucker rods are designed and manufactured according to the API Spec 11 B, grade KD, HL and HY according to SY/T5029-2006 standard, and grade KH according to company's specification.       

1. Grade C sucker rod is made from fine carbon steel. It is featured by mid-strength, good plasticity, toughness, corrosion resistance. It is suitable for sour medium environment where it is not susceptible to sulphuric stress cracking.
2. Grade D sucker rod is made from fine alloy steel, featured by high strength, better plasticity and long service life after heat treatment. This product is suitable for no-corrosion or light-corrosion environment oil-well widely.

   Specification (in)	Length (m)	Mechanical performance
   		Tensile strength σb MPa	Yield point σs MPa	Tensile stretch 200mm δ %	Reduction of area ψ %	Erichstm impact flexibility value AKV J	Fatigue strength
   							σ0.1 MPa	Cycle index
   CYG5/8	7.62, 8.0, 8.5, 9.14 and 1-3m Different long pony rods	793~965	≥620	≥10	≥50	≥60.8	406	≥1×106

    

   
   
3. Grade HL and HY sucker rods are super-high strength sucker rod, having the same size and main parameter as grade D sucker rod, but their strength is capable to reach 966~1195Mpa. Grade HL, HY sucker rods are suitable for the deep oil-well or big-pump capacity oil-well.
4. 
   
5. grade K, KD and KH sucker rod are made from fine Cr-Ni-Mo alloy steel containing different amount of Ni. They possess more powerful anti-corrosion function. The products are suitable for strong corrosion oil-well, with depth of shallow, middle and deep respectively.

       Physical and chemical properties of sucker rod and Pony rod.