40 years experience, orbit gear low speed high torque hydraulic motor Quality Choice

40 years experience, orbit gear low speed high torque hydraulic motor

BM1 motor is a small, economical type, designed with Spool Valve, which adapt the gerotor gear set design and provide compact volume, high power and low weight.

Features:

1. Advanced design of the spool valve and Gerotor gear, has small volume, high efficiency and long life.
2. Credible shaft seal , which can bear high pressure of motor, can also be used in parallel or in series.
3.Direction of shaft rotation and speed can be controlled easily

4. Variety of connection types of flange, output shaft and oil port

5. Best combination of efficiency and economy in medium duty applications

Main Specification

Note:

1. Intermittent means the entrance of the maximum pressure. 

Continuous working pressure means the differential pressure.

2. Motor should not work under the highest pressure and the maximum speed.

3. The running time should not exceed 10% under intermittent working conditions.

4. The maximum working temperature is 80℃

5. The maximum allowable backpressure is 10Mpa, but recommend not exceed 5Mpa, Case drain line is recommended when back pressure higher than 5 Mpa.. The motor life is benefited from a case drain line.

6. A simultaneous maximum RPM and maximum pressure NOT recommended Maximum pressure or maximum RPM operation: 10% of every minute.

7. Recommended fluids: Anti-wear type of hydraulic oil. viscosity recommended 37-73 cSt. Recommended filtration ISO18/13.

8. It is highly recommended that the motor runs below 30% of rated pressure for at least one hour before application of full load. Be sure the motor is filled with fluid prior to any load applications.

We have 40 years of production experience
20 years of experience to supply China Eaton

We accept OEM without no MOQ of all type of orbit hydraulic motor,

Please let us know your previous motor Serial Number or offer us a picture, we will design a drawing for your confirmation