digital cement flame photometer

digital cement flame photometer

Cement industry-specific flame photometer

Technical parameters:

1.     Sensitivity: K (potassium) 1μg / ml full-scale deflection, Na (sodium) 1μg / ml full-scale deflection

2.     Stability: continuous injection in the same sample within 15 seconds, drift is not greater than 3% of reading value

3.     Receiving Manners: silicon photocell

4.     Spectroscopic methods: interference filter

5.     Display: Dual LED digital display

6.     Measure range: low range K: 0.0-19.9, Na: 0.0-19.9

high range K: 0.0-80, Na: 0.0-200

7.     Linear range: K: 0.02-0.07mmol / L; Na: 1.10-1.6mmol / L

8.     Repeatability: Cv less than 2%Repeatability: Cv less than 2%

9.     Size and weight: 400mm × 250mm × 500mm, 12.5Kg

Main features:

1. K, Na simultaneous testing for clinical biochemical tests and quality control

2. meter direct reading for the analyte for quantitative analysis

3. reliable ignition, have special gas path

4. simple operation, rapid analysis

5. sample less, high sensitivity

6. stability, good reproducibility, a linear correction system

7. using liquefied petroleum gas as fuel, easy to use

8. additional gas pressure monitor, avoid blind operation

Usage conditions:

1.  Ambient temperature: 10 ℃ ~ 35 ℃

2.  Relative humidity: less than 85%

3.  It should be placed horizontally, avoid direct sunlight, surrounded by no strong electromagnetic interference, vibration-free use.

4.  Should be equipped with fire extinguishing device, good ventilation

5.  Power supply voltage: 220 ± 22V; frequency: 50 ± 1Hz and a good grounding, rated power 30W