Meili YSK C Frame Hydraulic Workshop Press Machine With Pressure Management System

Meili YSK C Frame Hydraulic Workshop Press Machine With Pressure Management System

(1) About YSK c frame manual hydraulic workshop press machine

1.YSK Series C-Type hydraulic workshop press machine is one of the new generation of plate process and developed by Meili Hydraulic Pressure Machine Factory,The press is for cutting, punching, blanking, bending and light stretching work.

2. Totally European design, streamlined looking, Steel-welded frame, Wide body frame eliminating vibration for improved ide life and machine,High rigidity and less deformation Compact.

3. C- frame provides maximum rigidity and minimum deflection for accurate parts and long tool life. Thick plates and large columns provide you with the stable platform you need for your demanding application.

4. Fully enclosed drive, easily accessible for maintenance, eliminates, exposed over hanging parts and mechanism.

5. High accuracy, high efficiency, simple and convenient operation, good performance, favorable price and best service.

6. The machine by the European Union CE certification and ISO quality system certification.

(2) Hydraulic system:

1. Adopt integrated hydraulic control system, more reliable and easy for maintenance. The hydraulic system consists of motor, oil pump and valve groups and hydraulic Tank Built-in design.

2. Every complete working cycle can be achieved through the control of hydraulic valve.The remote adjustment valve can adjust the working pressure at the right side of the wall board.

3. All seals in cylinder is imported,the most famous brand,good quality and high performance

4. Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly.

5. Hydraulic overload protection device achieving high sensitivity in effectively protection against overload, to ensure convenient and reliable operation. Being able to work under rated load continuously,stable working and high precision.

(3) Presses control system:

1. The Presses which could realize three-operation mode: adjustment, manual and semi-automatic.

2. Selector switch modes of operation: jog (setup) and run (cycle).

3. Machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA.

4. PLC press control is flexible and safe. PLC controls allow for customized press cycles.

5. Adjustable proximity switches allows stroke adjustments in seconds.

6. All our electrical, hydraulic and mechanical parts are standard in the industry and available throughout North America and Europe.

(4) Ram structure:

1. Guiding device: adopts four cylindrical location guiding to make sure of the steady precision, and it's easy to test and maintain.

2. Can move the ram up slowly,which allows the operator to control work piece conveniently.

3. Universal fixing-surface of the upper tool can be meeting with the clamping requirement of the tool farthest.

(5) Electrical system and the safety interlock:

1. Electrical components are imported or from Sino-foreign joint Venture,in accordance with international standards,reliable safety,long life,good anti-interference ability,a radiation unit is fitted in electrical cabinet.

2.Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.

3.Emergency stops on machine and foot switch for safety and Fence like body guard is standard or light curtain is optional.

(6) Standard features available on all C-Frame press:

1.Adjustable stroke control, Pressure regulator and gauge, allows to limit the ram pressure.

2.Pressure reversal switch .

3.Adjustable speed control allows operator to adjust ram pressing speed(Optional).

4.Ram travel is guided by 4 precision-ground chromed rods(Optional).

5.Jog mode used for simplifying setups.