high quality onix induction cooker

Phenonena

Check Points

When “ON/OFF” is pressed,the indicating lamp does not light

1. 1.       Check whether the power plug is inserted tight or not.
2. 2.       And whether it is electrified
3. 3.       Check whether switch,socket,fuse and power cord is good or not.

The cooker won’t heat,”B-B” is heard or “E0” is displayed

1. 1.       Check whether pot is suitable
2. 2.       Check whether pot is put on the center of plate

The indicating lamp flashes or”E1” is displayed,but it won’t heat

Current voltage is lower than 160V,try again when voltage between 160V~270V.

The indicating lamp flashes or”E1” is displayed,but it won’t heat

Current voltage higher than 270V,try again when voltage between 165V~270V.

The indicating lamp flashes or”E2” is displayed,but it won’t heat

Inner of unit termperature is too high,please check motor fan is good working or spread exit is open or not.

The indicating lamp flashes or”E3” is displayed,but it won’t heat

Check the electricity power is suitable or not.

The indicating lamp flashes or”E5” is displayed,but it won’t heat

The pot is too hot,please wait till the pot is in normal temperature

The indicating lamp flashes or”E6” is displayed,but it won’t heat

Inside of pot no loading,please select fry or other function.

If the power cord is damage,the cooker must be send to the appointed repair center and changed to use the same specification power-cord.

To avoid danger to you and damage to the cooker,please send the cooker to the dealer or the appointed repair center when the cooker is breakdown.Do not repair it by yourself.

Contact our technology serive center directly if the repair centers can not repair the cooker.