Yutong 0.75~ 0.80pa Impact Compactor

Yield characteristics of impact compression machine 6830

The apparatus of compressor 6830-impact wheel impact is the body structure not roll cylinder. During the roll, when the point farthest from the center wheel hub contacts the ground, accumulated potential energy and kinetic energy transferred to the kinetic energy instantemente closer to the point when the center wheel contacts the ground to impact land, besides the energy storage instantemente energy emitted liquid pressure, all these processes in order to perform compression of land.

While large impact energy works on Earth, the reaction force of the earth is transmitted to the wheel axle, the rack and the tractor. Is necessary to install the damping structure of various levels: the damping spring is used in the shaft portion traction block Gaucho buffer used in the restricting portion rocker arm, at the other end of swing arm used buffer tank and energy storage, Gaucho sleeve impact between the wheel and the rack is used trailer, linking cushion impact between the wheel and the hub is used. Various damper systems greatly reduce the impact to the machine and tractor.

The liquid oil system pressure compressor pressure liquid prevents the liquid route back pressure tractor through connection with the connector of rapid change, the use is safe, and is quick and easy disassembly and reassembly.

Controls tank lifting wheel impact is lifted from the ground, the weight is fully supported against the bracket when the tire gaucho contact the ground, the tractor pulls the compressor to transfer short distance without damage to the surface on the way.