3d fiberglass weave wire mesh

Specifications

Fiberglass mesh 

Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, bitumen, gypsum and so on.

Material:Fiberglass yarn, alkaline resistant latex

Main mesh sizes: 4mmx4mm,5mmx5mm,10mmx10mm etc.

Weight: 75g/m2, 125g/m2, 145g/m2, 165g/m2 etc. 

Width : 1 m-2 m. Mostly 1m Width

Length : 50 m,80m,100m or as per your request

Color: white,orange,black,blue,yellow etc.

Standard Unit Weight :  1) For Outside Wall : 70g-160g/ Square Meter

                                            2) For Inside Wall : 50g-60g/ Square Meter

                                            3) Also can be your customized Max : 300g/M2

Features:
1.Made by C-glass or E-glass fibers woven roving as basis material,andtreated with acrylic acid copolymer  liquid.
2. High in alkali-resistant, strength, widely used in reinforce cement, plastic, gypsum and waterproof.
3. An ideal engineering material for construction field.

Storage:

 1.Store rolls in a cool, dry location.

 2.Store away from the direct contact with ground and concrete

 3.Store out of direct sunlight.

Application:

1.External thermo insulating composite system (ETICS) & External Insulating Finish System (EIFS)

2.External & Internal Plaster Reinforcement.

3.Marble Slab Reinforcement.

4.Asphalt reinforcement (Roof waterproofing)

5.Reinforce lightweight: construction boards.

Packaging:

1.Coated Alkali Resistant Fiberglass Mesh Cloth is wound in paper tubes. The quantity of fabric wound is  100m and a width of 1m. Each roll is packed in a shrink film or plastic bag.

2. 30 rolls/pallet or 2/4 rolls/carton
3.we can also pack as your special request.

Picture of fiberglass mesh

Manufacture of fiberglass mesh

Packing of fiberglass mesh