epoxy coated fiberglass mesh FACTORY

Specifications

Epoxy coated fiberglass mesh

Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, bitumen, gypsum and so on.

Material:Fiberglass yarn, alkaline resistant latex

Main mesh sizes: 4mmx4mm,5mmx5mm,10mmx10mm etc.

Weight: 75g/m2, 125g/m2, 145g/m2, 165g/m2

Width :  1 m-2 m. Mostly 1M Width

Length : 50 m/roll or as per your request

Woven Structure:plain,twill...

Standard Unit Weight :  For Outside Wall : 70g-160g/ Square Meter

                                         For Inside Wall : 50g-60g/ Square Meter

                                         Also can be your customized Max : 300g/M2

Features:
1.Made by C-glass or E-glass fibers woven roving as basis material,andtreated with acrylic acid copolymer  liquid.
2. High in alkali-resistant, strength, widely used in reinforce cement, plastic, gypsum and waterproof.
3. An ideal engineering material for construction field.

Storage:

1.Store rolls in a cool, dry location.

 2.Store away from the direct contact with ground and concrete

 3.Store out of direct sunlight.

Application:

1.External thermo insulating composite system (ETICS) & External Insulating Finish System (EIFS)

2.External & Internal Plaster Reinforcement.

3.Marble Slab Reinforcement.

4.Asphalt reinforcement (Roof waterproofing)

5.Reinforce lightweight: construction boards.

Packaging

1.Coated Alkali Resistant Fiberglass Mesh Cloth is wound in paper tubes. The quantity of fabric wound is  100m and a width of 1m. Each roll is packed in a shrink film or plastic bag.

2.we can also pack as your special request.

Picture of fiberglass mesh

Manufacture of fiberglass mesh

 Packing of fiberglass mesh

If you are interested in our fiberglass mesh,welcome to contact us.