Made in China steel ultrasonic thickness measuring gauge tester meters

Made in China steel ultrasonic thickness measuring gauge tester meters

Introducton & Application:  

Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing. Materials measured: only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron.

Specifications:

Functions:

High resolution measurement

Probe automatic zero calibration for system error correction

Capture the value of the minimum thickness.

Status indicator of the coupling and low battery.

Auto sleep and auto power off function to conserve battery life.

Humanized shape design, compact and portable, Can be used in harsh environment.

Notes:

1. When big difference occurred,p lease check as below:

    1.1If the material code is correct;

    1.2Re-calibration;

    1.3There are air hole, Non-smooth inside material.

2. Please don't pull the wire of sensor often to avoid the wire broken or with bad contact ion.

3. Keep the sensor clean when finished testing.

4. Only can calibration on standard calibrate block,other test block will result in big error or wrong value in our calibration method 5.

5. Don’t repair by yourself. Non-authrised repair method not only cause of the error measurement, but also lose the warranty right.

Thanks for your attention to our products, any interest pls contact Ms.Shelley,  and wish you have a nice day.