JCT BMC Kneading Machine

 1. Introduction of BMC Kneading Machine

1)  Kneading machine does very well in mixing, kneading, crushing and dispersing for high-viscosity liquid materials, with no dead point. 

2) Two sigma or Z-type blades.

3) Equipped with inverter for frequency control.

4) Vacuum and high pressure are available.

5) The cylinder is opened hydraulically. 

6) Discharge mode: Hydraulic tilting, Bottom pumping,or Screwing.

7) With jacket outside of the cylinder, for heating or cooling.

8) Heating mode: Hot oil, Electric or Steam/

9) All the parts that contact with material are made of stainless steel.

10)Widely used in high viscosity sealant, silicone rubber, CMC, adhesive, also used in batteries, ink, pigments, dyes, pharmaceuticals, resins, plastics, rubber, cosmetics ect.

  Resins /Adhesives Kneading Machine

   Kneading Machine                   JCT Machinery

  Resins /Adhesives Kneading Machine

  Kneading Machine                    JCT Machinery

  Resins /Adhesives Kneading Machine

  Kneading Machine                   JCT Machinery

  Resins /Adhesives Kneading Machine

 Kneading Machine                                     JCT Machinery

  Resins /Adhesives Kneading Machine

2.Products range

Chemicals Industry: 

Sealant, Rubber, Glue/Adhesive, Paint, Dye, CMC, Battery, Pigment

 Food Industry:

Bubble gum, Chewing gum, Soft candy, Cheese etc.

Pharmaceutical:

Some medicines and medical materials.

 Cosmetics Industry:

 According to stattistics, JCT vacuum kneaders are most widely used in making:

Silicone sealant, Hot melt adhesive, Bubble/ chewing gum, Silicone rubber & Compound rubber, CMC

  Resins /Adhesives Kneading Machine

Product Range                      JCT Machinery

  Resins /Adhesives Kneading Machine

3. Technical Parameters

  Resins /Adhesives Kneading Machine

 Welcome to visit our website to know more products: 

gdjct.en.china.cn

Q: Can you send the formula for the products we want to make?

A: Our machines can be used for many kinds of product making, such as Resin, Paint, Adhesive, Cosmetic, Food, Chemicals. There are many kinds of these products, so it's impossible for us to know all the formulas and technologies. We can assist you to find the raw material list you need, and after you place order with us, we can help you to find formula and technology, there will be engineers to teach you how to make the product, and the cost will be on your account.

Q: Do you have machines in stock?

A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC.

Q: Can you send the detailed drawings of the machine to us before we place order?

A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, our engineer will design the specific technical parameters fo you and send you the detailed drawings. Once you confirm without questions, we will put it into production.

Q: Why does it take at least 20 days to finish the machine?

A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessories for the production. Once the drawings are finished, our workers will start the production, from welding, polishing, assembling, debugging, detection and so on. After finish, they need time to check the machines, if found any possible defect parts, they will return to the production until every part is 100% approved.

Q: Can we pay the balance after we receive the machines and test without problems?

A: It's unnessary to worry about the quality of our machines, we are confident in that. After the machine is finished, we can install and test the machine for you (if you can not come to our factory, we can record a vedio and send to you). Only after you check without problems, we will effect shipment. 

1. Company profile

1) China Foshan JCT Machinery Co., Ltd.

2)  A professional chemical machinery manufacturer.

3)Specialize in reaction vessels, kneading machine, dispersion mixers,

 planetary mixers, powder mixers, high speed dispersers.

4) Set up in 2005, now with a 50-technicians, 10-senior-engineers and 2-      specialists designing & manufacturing team, and 15-sales team.

5)  Main markets: Chian, Middle East, Europe, Africa, South America and South Asia

  Resins /Adhesives Kneading Machine

 2.Certificates

  Resins /Adhesives Kneading Machine

3.Our Clients

  Resins /Adhesives Kneading Machine

  Resins /Adhesives Kneading Machine

4.Why Choose Us?

1) Profession: