Free installation waste plastic small pyrolysis machine to engine oil

seaworthy packing according to the export standard with no damage

Specifications

Free installation waste plastic small pyrolysis machine to engine oil

Shangqiu Sihai Machinery Equipment Co.,Ltd is a manufacturer of waste tyre/plastic/rubber 

continuous waste tyre small pyrolysis machine and refining machine.Our technology has obtained 

ISO9001, ISO14001, and CE.Our products continuous waste tyre pyrolysis plant sell well in America, Canada, Malaysia,Philippines,Afghanistan,etc. 

All machines small pyrolysis machine are running well, and this project is 

very profitable.

Free installation waste plastic small pyrolysis machine to engine oil    

small pyrolysis machine-Fully enclosed Carbon black discharging system

1. Under high temperature: this design able to prevent carbon black pollution or flying out during discharging.

2. Carbon black can be stored in carbon black tank or conveyed anywhere according to users' need .

small pyrolysis machine-Security

1. Our small pyrolysis machine is equipped with anti-explosion device, safety valves, emergency valves, pressure and emperature meters, vacuum pump, as well as the

alarming system.

2. small pyrolysis machine adopts automatic submerged welding-arc technology

3. All of the weldings will be detected by the ultrasonic nondestructive testing method.

small pyrolysis machine-Environmental-friendly:

1. small pyrolyis machine includes three layer dedusting system to cleanse the smokr generated from the plant, which will guarantee the emission each European pollution control standard .

 2. Faintly acid waste water shall produce in the course of treatment of oil products (about 30 kg waste water each ton material, small volume and tractable); after neutralization

by adding faintly alkaline liquor, the neutral waste water shall be harmless with three-grade filtration and be discharged into special evaporation processor to vapor.

3.The combustible un-liquified oil gas will be recycled to heat the reactor after the purification of the water seal during small pyrolysis machine.

Free installation waste plastic small pyrolysis machine to engine oil   

small pyrolysis machine-Firstly, make reactor rotate clockwise 0.4r/min, put raw material into reactor, close feeding door.

small pyrolysis machine-

Secondly, burned the fuel material(coal,or wood,or natural gas ,oil ) in the furnace. 

Reactor will be slowly heated, when the temperature reach around the degree of 200-260, 

oil gas will come out .

small pyrolysis machine-

then go to cooling system and liquid to oil.Some incondensable gas which can't cooling down will be lead to furnace through a gas pipe. 

It will be used to heat reactor.This can save your energy. Only the first 2 hours use 

energy for heating. After the first 2 hours mainly use gas, little energy is ok. After pyrolysis, all the oil gas come out from reactor, the temperature will fall down. Then make it rotate anticlockwise, carbon black discharging begin.

small pyrolysis machine-

Lastly,when the temperature deduce to 50 oC, worker can opened the door of reactor take steel wire out.

Free installation waste plastic small pyrolysis machine to engine oil  

Free installation waste plastic small pyrolysis machine to engine oil