waste tyre/plastic/rubber recycling production line

One set of the pyrolysis plant can be held in two 40'' HQ

We are a professional manufacture specialized in producing waste tyre pyrolysis plant for more than 8 years with ISO14001:2004 , ISO9001:2008 and CE certificate.

We have experiences in exporting to Jordan, USA, India, Brazil, Albania, Philippines, Dubai, Vietnam, South Korea, and Ghana and so on, and have a good reputation in pyrolysis equipment market.

We will be in charge of arranging our technician to go to your place to guide the installation and train your workers how to operate the pyrolysis plant,and you will be in charge of the food, accommodation and round air tickets.

The products output after pyrolysis operation are as follows:

1. Crude oil: 40%~ 45 %( Because the oil production depends on the quality of the tyre and usually it's between 40%~45%)

2. Steel wire: 13%

3. Carbon black: 37% (can be used to make briquette)

4. Waste gas: 5%

Working process Of pyrolysis plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 300-400°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

Land requirement:10M*30M(300meter square) is needed to install the pyrolysis unit

This equipment only needs 2 or 3 people to operate it.

Delivery time:around 20 days