lead acid battery machine

Specifications

lead acid battery machine(equipment)
Use hydrau Usages Mainly used in casting the positive spine of Tube-kind lead acid battery,with low antimony content(less than 3%)

Composition Host,Lead pot,Electric panel,Mould

Features

lic pressure system to control the machine,with big pressure,and running stable.

1,Use heating pipe to melting the lead,and the temperature can be automatically controlled with a range of adjustment.

2,Use heating pipe to heat the nozzle,mould,display and control the

temperature with pressure meter,with alarm fuction(when temperature

too high).

3,Use cycle water to cool the mould.

4,The mould use H13 special mould material to produce according to the layout.Using safety interlock,automatically do the folloing:compound mould,casting spine,open  mould,push-out(this is one cycle).to promise safety production.

5,Electrical panel:Use Siemens brand screen and PLC to control,it will

display mode and parameters;with Manual and Auto type.And you can

enter parameters according to requirements.

Spec&Parameter:

1)     Double-plate type: Max spine length---480mm

This kind machine can produce spine 3-6pcs per minute.It can automatically produce the spine in high speed with good quality.and it can save time than sigle-plate.

2)     Single-plate type: Max spine length----620mm.

   This kind machine can produce spine 2-4pcs per minutes,it can produce                  automatically the   spine with required length in good quality.its spine length can fulfill needs of different kinds of traction,and so on.