Building biaxial pp plastic geogrid

Building biaxial pp plastic geogrid

Building biaxial pp plastic geogrid Introduction

Building biaxial pp plastic geogrid  is manufactured from polypropylene; it is produced through the process of extruding, punching, heating, longitudinal stretching ad transverse stretching

Building biaxial pp plastic geogrid Performance

High tensile strength at both longitudinal and transverse direction

Building biaxial pp plastic geogrid Application Range

Soft foundation reinforcing for hightway,railway, slope protecting projects, landfill sites

Building biaxial pp plastic geogrid Benefits

•  Improving bearing capacity of foundation’
• Preventing cracking and subsiding
• Convenient to construct, reducing cost and maintaining expense 

Building biaxial pp plastic geogrid Dimensions

UNIT=mm 

Building biaxial pp plastic geogrid Technical Parameter

  Standard: GB/T17689-2008

Building biaxial pp plastic geogrid Packaging and storage

PP tensar Biaxial geogrid, the length of the product roll is decided by the construction request. The rolls are to be horizontally placed and not more than 6 layers high.

Unless otherwise specified, the production should be stored in a non-corrosive gas, non-dust, well-ventilated, dry and rainproof area.

It is recommended that the room temperature should be maintained below 35°C,and humidity should be always maintained below 65%.

Building biaxial pp plastic geogrid Callery

Your questions will be very welcome,please feel free contact me,thanks!

Thank you for your visiting!