Pneumatic cylinder blow molding plastic jug making machine up to 2L

Plasticizing Cpacity At 70kg/h Of 2L Hollow Product Blowing Machine

TVD-2L Basic Specification:

* Double Station 
* 65mm screw / 15kw motor;
* PE etc material;
* Automatic Trimming: Neck/Bottom/Handle/Slides;
* Die-heads for choosing:
   Single die-head(1L to 2L) ---at 300pcs per hour;

   Double die-heads(500ML to 1L)---at 800pcs per hour;

   Triple die-heads(200ML to 500ML)---at 1500pcs per hour;

   Four die-heads(up to 200ML)---at 2500pcs per hour;    

* Center distance:

   Four die-heads---80mm;Triple die-heads---100mm;Two die-heads---160mm;

TVD-2L Working condition:
* Power supply: 380VAC/50Hz (depending on client's country)
* Water Cooling: 20℃(3HP Water chiller)
* Air source: 0.6Mpa, 0.8m³/min (1.0 m³/min air compressor)

Technical Characteristic:

1) Smart series double station blow molding machine is TONVA company's original design,it's combines bydraulic and pneumatic.

2) The performance is well and running stable,it's easy to operater.The sal;es is hundreds and it's mature design in company.

3) Suitable from 5ml to 5L.

4) Suitable for drug bottle,washing bottle,oil bottle,plastic toy,beverage bottle,drill box etc.

Die-head

The die head is made by stainless steel S136H or high quality alloyed steel 38CrMoAIA with high hardness, strong corrosion resistance and long operating life after nitrogen treatment.

Clapming system

Platen clamping,Three tie-bar design, clamping by Pneumatic cylinders.

PLC

Adopting PLC to control the action program of the whole machine.

Automatic trimming

The machine equipped with automatic trimming system, resulting saving the labor cost at least 75% for one machine and guarantee the good quality continuously.