PHS-10 with M4 screw hole Rod End Bearings

Certification for PHS-10 with M4 screw hole Rod End Bearings 

About rod end joint bearing:

  1.Rod ends vibration of rod end bearing damage is very sensitive, such as peeling, indentation, corrosion, cracks, wear, etc. will be reflected in the rod end bearing vibration measurements, therefore, by using a special vibrating rod ends measuring device (frequency analyzer, etc.) to measure the size of the vibration, the frequency points can not be inferred unusual circumstances. The measured values due to the conditions of use of the rod end or sensor installation location is different, and therefore requires prior measurement of each machine to be determined after analysis and comparison criteria.

  2.Rod end bearing temperature, generally rod end chamber outside temperature can be inferred that if the use of the hole can be measured directly rod end bearing outer ring temperature, it is more appropriate position. Typically, the temperature of the rod end bearings with rod end bearings running slowly began to rise 1-2 hours to reach steady state. Normal temperature rod end bearings due to heat capacity, heat capacity, speed and load of the machine and different. If the lubrication, install the appropriate department, the rod end bearing temperature will be rapid-rise, there will be abnormal high temperature, when to stop running, take the necessary precautions. You can always monitor the use of the thermal sensor rod end bearing operating temperature, and automatic alarm or stops to prevent burning shaft accident occurred when the temperature exceeds a predetermined value.

Company Profile 

    Yongkang ALL NICE BEARING CO.,LTD locates in Linqing city,Shandong Province.Established in 1998.It is an experienced manufacturer producing various kinds of bearing.

   More than 200 staffs,10 technicians included,who can give you good consultant.For convenient transportation for goods,we established a company registered in Yongkang City,Zhejiang in year 2010.Our main market :Europe,USA,South America,Southeast Asia and middle east.We win the praise of customers all over the world.Our belief:"Quality first,Customer first",all staffs will try their best to meet all customer's demands.

   We're looking forward to beginning our business relationship with you.

1.Enterprise Philosophy:

     Quality first and customer foremost

2.Enterprise purpose:

   Quality assurance‚ wide product range,favorable price and punctual supply 

3.Management  philosophy:

   Integrity,pragmatic and supply 

4.Spirity:

   People-oriented and advance with the time