Solar Charge Controller/Solar Controller/Solar Regulator (Tarom 440)

Specifications

The Steca Tarom is the high end solar charge controller optimally designed for demanding telecom applications and complex off-grid PV hybrid system architectures. A huge variety of exiting features allows the user to adapt this controller to the special needs of the specific installation.

The optimised SOC calculation of Steca is implemented in the Tarom. It is your best choice for the medium and large power range (up to 2400 Wp) on three voltage levels (12 V, 24 V, 48 V). Additionally it is possible to connect further devices like a temperature sensor, a datalogger and a remote switch to configure and monitor the photovoltaic system optimally. An in built Ah counter gives additional valuable energy balance information to the user.

Certificates
listed for Worldbank funded projects in Nepal
conform to European Standards (CE)
Made in Germany
manufactured in a DIN EN ISO 9001:2000 and DIN EN ISO 14001 facility

Electronic Protections  
high voltage disconnect (HVD)                    
low voltage disconnect (LVD)             
dept of discharge disconnection (DOD)
reverse polarity of solar modules
reverse polarity of load & battery
short circuit of solar modules
short circuit of load
over temperature
over voltage
lightning protection by varistor
low electronic interference (EMC)
open circuit battery
reverse current at night

Displays
two line LCD showing SOC, Vbat,
all currents, Ah, alarms, charging
procedure

Update Date:2010-05-21 20:06:46