ZY-H112-2 Industrial Metal Polishing Machines Hot Selling

ZY-H112-2 Industrial Metal Polishing Machines  Hot selling

Advantages:

1,Combined environmental dust removal series
2,suitable medium:Plumbing equipment, metal products, aluminum, stainless steel,iron,copper,etc.

Feature:

The Polishing Machine (also called the Buffing Machine) is used to polish soft metals including copper and brass as well as plastics such as perspex. The two ‘mops’ spin at high speed when the ‘on’ switch is 

pressed.If the material is carefully pressed against the mop and moved backwards and forwards it will be polished.
The material must be filed to removed scratches and then wet and dry paper or emery cloth is used to further smooth the surfaces. Only then can it be polished on the buffing machine.

The diagram on the left shows the correct way to hold the work and how it should be pushed gently against the rotating mop. The work should be held firmly in both hands and moved backwards and 

forwards against the lower part of the mop. If the work is held in one place the mop will wear quickly making it difficult to polish materials. Use the full width of the mop.
Great care must be taken so that the top corner of the work is not caught by the rotating mop. If this happens the work will be ripped from both hands and it will fly at high speed into the guard.

 When this happens it can be quite frightening.This is clearly a dangerous way to hold the work as the top corner is about to be caught by the rotating mop.Another dangerous accident is about to take place. 

The work is about to be pressed against the top part of the mop. This should be avoided as the work will be ripped out of the machinists hands and it will fly out at high speed towards him/her.

A belt sander is a sander used in shaping and finishing wood and other materials.[1] It consists of an electric motor that turns a pair of drums on which a seamless loop of sandpaper is mounted. Belt sanders may be handheld and moved over the material, or stationary (fixed), where the material is moved to the sanding belt. Stationary belt sanders are sometimes mounted on a work bench, in which case they are called bench sanders. Stationary belt sanders are often combined with a disc sander.

Belt sanders can have a very aggressive action on wood and are normally used only for the beginning stages of the sanding process, or used to rapidly remove material. Sometimes they are also used for removing paints or finishes from wood. Fitted with fine grit sand paper, a belt sander can be used to achieve a completely smooth surface

You may be interested in :

1.How can I contact you ?get prices?

Though Alibaba feedback

By email

By fax

Or calling

2.If you can provide detail E-catalogue or products detail information ?

Yes,it’s necessary ,clients ‘ any requirements ,if we can do ,we will try our best to support .

3. Small Clients or Small order can be accepted ?What's MOQ?

Of course,every client is our God,no matter big or small ,we will treat every clients as our good friends, provide one step service .

4. Could I get some samples for testing before placing order ?how soon we can get them ?

Of course ,you can!it’s our best honor can provide our samples to your esteemed company ! As usual we will send the samples within 5days .

5.What’s your payment terms ?

As usual we do TT prefer ,but we can discuss according to real situation .

aluminum capacitor cover

1.variaty sizes can be chose

2.Variaty styles can be choose

3.Soon delivery

nfirmed quality