Stainless Steel Standard Sand Test Sieve

Specifications

Stainless Steel Standard sand Test Sieve

Frames of seamless spun brass with rolled edges and stainless steel mesh. Extended bottoms fit all frames, pans or separator bottoms of the same diameter so a set of sieves can be stacked.

Material:  stainless steel, brass and G.I Frames.

Frame: a rigid sidewall used to form the body of the testing sieve. Common depths are 50.8 mm (2"  full height)  for 8” sieves and 25.4 mm (1" half height).
Special  application sieves  of other depths are also in use. 
Mesh:  screening  medium with openings of uniform size  and shape made of woven, punched or electrodeposited material. 
Pan:  stamped or spun receiver of materials passing through the finest sieve. 

Skirt: section of test sieve below the sieve mesh that allows for mating or nesting of the sieves in a test stack.

Application:  In petroleum, chemical industry, cement, ceramics, pharmacy, metering, etc.

Each test sieve is supplied with a Serial Number and matching Test Sieve Certificate of Compliance.

Features:  The frame of testing sieve is made of SUS 304# stainless steel, the thickness is 0.6 mm, firm and durable, no magnetism.
Sieve and frame are soldered all around, then make a mosaic base, as the frame is two-double, so that the testing sieve is more firm and durable.