VGFCI-2 type leakage socket contact pressure tester

1.Overview

 The test device applied to the production line for the leakage socket contact pressure tester.

2.Technical characteristics

(1)The stated voltage of the equipment 220VAC/ 50Hz

(2)The test speed of the instrument 15 times per min.

(3)The voltage test range 50-300g

(4)Pressure accuracy 1% .

(5)Test of physics displacement tests Can set from 0.1-5.0mm

(6)Station; There are two stations, each station maximun can make one leakage socket.

(7)Positioning groove fixure There are two sets. (Each set can install two Contacts)

(8)Two stations and four contacts separately show the pressure and qualified status.

Non-computert ype use LCD control.

(9)Testing Process

 a. Connected the power supply switch.

 b. Placed the tested switches on the test fixture.

 C. Press the test button, firstly, quickly top operation the test fixure (about 0.5s) and to stop at the preset position. Guarantee the test sample contacts with the pressure and the distance between the test probe  as close as possible.

 d. When the probe contact with the test sample contacts, through the connected of the current to judge, recognize and preserve the position zero.

 e. When the probe arrived at the set the displacement distance from the zero, recognize and preserve the pressure value of the points.

 f. Data latches and judge and the qualified state show (Computer type pass the data to the computer)

 g. When Complete the test, the equipment will returned in situ, removed the sample and wait for the next test