Power Supply Tester, Load Tank, for IEC60884 And IEC60669, UL1054

Power supply tester is designed according to the relevant

Standard requirements of IEC60884 and IEC60669, UL1054 and relevant IEC standards on the electrical annex breaking capacity and match equipment design in the normal operation..

Matching to the use with the mechanical movements test equipment (such as RH19401 plugs and sockets life tester), for on and off capacity test, breaking capacity test, bend test and the normal operation test and so on.

The tester is made by the high grade aluminum extrusions, with the beautiful overall appearance.

Install with the casters below the cabinet to convenient the move.

Tester with high-grade PLC control, 7 inch touch screen display interface, the operation of the tester is stable, convenient and practical. In order to convenience the customers to adjust the technical parameters, so we according to the common standard parameters to built nearly 30 kinds of commonly used parameters mode, can be quickly and easily to adjusted the current, power factor and other parameters, even if you are the initial time to operation it, also you accurate and rapid adjustment to the demand parameters.In addition, the tester reserved 10 kinds of custom mode, it can based on your real need to setup, adjust and save the parameters, when you want to used it again, you can be quickly adjusted it to the demand parameters.

Technical parameters

l Power supply Single phase: AC220V/60Hz,3 phase:AC380V,60Hz

l Ordinary load: Test voltage can continuously adjustable from 50 to 280V

l Current:1-63A,Current can be adjustable

l cosj

(1.current<10A, the power factor is continuously adjustable 0.3-0.98.

(2.Current is 10A-25A, the power factor is continuously adjustable 0.45-0.98.

(3.Current>25A,the power factor is continuously adjustable 0.6~0.98.

l Power factor accuracy is ±0.02

l Accuracy is 0.5 class

l Test current Single route

l Working mode:Intermittent

l Load ON and OFF ratio is: on is 25%, off is 75%

l Load swift method: Panel switch swift

l Device shall be controlled by a computer, and required software shall operate under Windows 7.

l Computer control cabinet: Switch test system includes separate plug and socket life tester, 3 separate Power supply testers, the plug and socket life tester and the Power supply testers through the R485 interface to connect to the computer control system. The core of the entire system is the computer, the computer software through the industrial-grade communications port RS232 and the PLC programmable controller to connect, respectively to carry on the control, data collection, calculation and management for the power supply tester and the life tester. During the test process. computer software can real-time read the voltage,current, power, test numbers, abnormal times and automatic to save the test data, all the test process are finished automatically.

l Each power supply tester is equipped with the touch screen and PLC systems, can operate independently and control.
Computer control system cabinets, data collection, computer, printer.

l Based on the different standard requirements to built nearly 30 kinds of commonly used parameters mode, the tester reserved 10 kinds of custom mode, it can based on your real need to setup