Sonic Animal Repellent GH-191

Specifications

GH-191 PIR  Sonic Animal Repellent 

PIR (Passive InfraRed) motion activated  Repeller is a safe and humane way to keep unwanted animals out of your garbage bin, garden or out of your yard; either indoors or outdoors.  For cat, dog, mice and pig.

Specifications:

 1.Power Supply 4xAA alkaline batteries

 2.Power Consumption: Standby current: 0.8 mA

 3.Working current: 22 mA

 4.Frequency: 40,000 Hz

 5.Coverage: 30 feet

Installation:

1.Install batteries:slide open battery compartment door and insert 4*AA alkaline batteries.

2.Mount to wall:drive two screws spaced as the back panel of repeller,screw head can be pass though lower hole and slide up to hole repeller in place,for best motion detection tge repeller should be located between 5 and 14 inchs off the groud.

3. Turn power switch to “ON” position. The PIR repeller is designed to be left ON continuously  

4. After turned ON, the LED light will illuminate for a few seconds. Now, the unit is in stand-by mode. When the PIR sensor detects motion, the ultrasonic speaker and LED light will activate. The ultrasonic speaker will run for 30-60 seconds. After this, the repeller will return to stand-by mode.

5.For best results choose a location away from large objects such as trees or branches, as these can interfere with the ultrasonic signal and motion detection.