MC-OB-09B-1 Electric Parturition Bed

Electric Parturition Bed

Model: MC-OB-09B-1

1.General Description:

This bed is designed for women’s parturition and gynecological operation.

It’s raising, lowering, reversed trendelenburg and trendelenburg and folding movement of the back section are all controlled by linear motor as the power system, which can be touched by micro-controller or foot pedal control. Chassis inside & outside cover are made by stainless steel.The surface has an artistic look and is easy for clearing. the inserted assistant table and size can be disassembled, so it is easy to operate for doctors.

2.Specifications

Dimensions of Table Top:

Overall length…………………………………………………………………1900mm

Width…………………………………………………………………………600mm

Dimensions of Leg Section:

 Length…………………………………………………………………………650mm

 Width……………………………………………………………………………600mm

Table Top from floor

Max. Height…………………………………………………………………930mm

Min. Height…………………………………………………………………680mm

Adjustments of Sections:

Back section raised from the horizontal……………………………………≥75°

Back section lowered from the horizontal……………………………………≥5°

Reversed Tendelenburg………………………………………………………≥15°

Trendelenburg…………………………………………………………………≥15°

Supple: AC220±10%,50Hz±1Hz

3.Parturition bed composition:

The parturition bed is composed of the mechanism and the electrical control system.

The mechanism is composed of the bed body, the leg frame, the contaminative basin, the auxiliary equipment and so on, the electric appliance control system is composed of inside controller, the transmission system, handle controller, foot pedal controller and so on.

4.Operation Instruction

1.The ascending and descending movements, folding movement of the back section, reversed trendelenburg , trendelenburg movements of the bed top are all electrically operated. It is equipped with movable control button box and pedal switch two control system.The controlling push button are all dot buttons, when the necessary button is pushed, the corresponding motor will work, when the button is not pushed, all movements stop.

2.In addition to general decubital function, the parturition bed also can be adjusted seat posture so as to adjust various childbearing body postion, it can be changed into parturition bed as needed in the process of childbearing, don't need to move a pregnant woman, so it can reduce the pregnant woman's disease bitterness and improve the space utilizatin of the hospital.

3.The contaminative basin can prevent the amniotic fluid leaks, it is easy to assemble and disassemble

4.The design of the seat section causes doctor to be easier to close to pregnant woman, so it is easy to operate.

5.The motion idler wheel is installed in the pedestal of the operating table, it can be locked to the ground when trampling the side pedal, it can move around when tramping the other side pedal.

6.Electric Parturition Bed mattresses are produced by the high-density sponge covered leatherette materials ,with antistatic properties.

7.The Company will be able to provide circuit draws in accordance with users’ needs.

8.This product is equipped with emergency power supply, and emergency power is lead-acid battery which you can automatically charge, When net power is off , the emergency power source can automatically jump to working condition. Emergency power has charging light. When the green light is bright, it means it is charging. After the power is sufficient, light turns off.

5.Accessories

6.Cautions

1) Lubricating oil should be added to every active part, so that the bed can be operated easily and prolong their life. Smear Vaseline over the tracks of the accessories on each side of the bed and the racks under the table, thus preventing it from being rusty.

2) Before putting into use, all attachments should be checked to see if they are locked securely so as to prevent them from loosing or sliding off while used.

3) As the bed has many parts, keep all the accessories in good order.

4) Keep the bed and accessories clean and prolong their life.

5) The ground must be kept dry. While the floor is washed and scrubed, please try not to make water spill into the plate or on the rotated wheels, thus preventing it from being rusty.

6)Put the bed in dry place to avoid the electric controlling devices being wet and being damaged.

7)Keep the button container dry and clean to avoid current leakage. Keep it in the proper place after being used.

8) The parturition bed can electrically operate 6 movements. These movements must be operated separately.the product is supplied by single-phase alternating current (220V, 50Hz), tri-socket. Please carefully inspect socket to insure reliable earth; shut off power while stop perform. When trouble happen please inform factory /agency to assign engineer overhaul, don’t overhaul by you self. Don’t press cables avoiding to damage cable or isolation during usage.

9) It must be repaired and kept clean regularly once a year.

10) The replacement parts during Electric operating table’ normal using period, has been confirmed scrapped (unable to use), should be handled according to the classification (recyclable and non-recovery).

11) The service life for Electric Parturition Bed is seven years. If it is used in expired period, it maybe led to wearing and corrosion of some mechanical parts, and had a negative influence upon the mechanical intensity. The patients maybe suffered. So Electric Parturition Bed should be used in the regular maintenance and during safety using period.

12) Electric Parturition Bed must be used on the antistatic ground.

13) Voltage : 24V emergency power supply, battery capacity ≥ 2.4AH. Emergency power inspection must be operated every six months. The battery should be replaced once a year. If the external protective conductor in the installation or the integrity of the wiring is in doubt, equipment should be supplied to run by the internal power.

14) Please pay attention not to make the metal contact with rechargeable batteries, prevent battery from exposing to high heat, and not to throw the scrapped batteries into the fire.

7.Cleaning, disinfection and sterilization

1.Washing the Parturition Bed with water is prohibited.

2.Clean Parturition Bed with a soft cloth, sponge, wet cloth or detergent. Not use a hard brush, steel wire brush, decontamination powder, paint, ether, bananas water, acid-base solution to any surface.

3.Mattress must be disinfection with alcohol, ether, ultraviolet disinfection and so on (abandoning high-temperature disinfection).

8.Environmental conditions:

 Transportation  and  stockpile conditions

  a) Environmental temperature:-40℃~+55℃

  b) Relative humidity:≤80%

   c) Atmospheric pressure:50kPa~106.0kPa

Moving Environmental conditions:

     a) Environmental temperature:5℃~40℃

     b) Relative humidity:≤70%

     c) Atmospheric pressure:70.0kPa~106.0kPa

     d) Supply voltage: AC220V±22V,50Hz±1Hz.

This device in package should be stored indoor with a relative humidity less than 80%, no erosive air and good ventilation is required. No side-sloping.

It can be shipped in regular transportation without crash, oscillation, rain or direct sunlight.

Please Send inquiry to us for the Electric Parturition Bed