High flow industrial vacuum filters

Specifications

water filtration Introduction--- High flow industrial vacuum filters

1.Material:stainless steel, carbon filter;

2.Application: This filter is widely used in metallurgical machinery;

3.Structure: Switching valves(1 piece);

pressure gauges (2pcs);

Differential pressure transducer(1 piece);

Housing and filter element(2pcs);

Balanced valve (1 piece);

gasket and O-ring(2sizes ,2pcs);

asbestos pad(2pcs);

flat gasket,bolts and nuts(16sets);

Operational process--- High flow industrial vacuum filters                                       

1. Filter installation is completed , open the inlet and outlet valve of the filter , the system start to working;

2. When the differential pressure transducer is alarm (differential pressure is achieved 0.35MPa), pls change the conversion valve and let another filter to work;

3. Open the vent valve(on the upper cap) and blowdown valve (on the bottom cap), let the dust fluid drain off the filter completely;

4. Open the upper cap of filter , take our the filter element;

5. Clean or change the filter element , then install the filter element and upper cap;

Model--- High flow industrial vacuum filters                                           

Picture--- High flow industrial vacuum filters                      

Our company

Contact me

If you are interested in this product , pls sent the following questions to us , we will calculate the

best to you with the specifications :

nnection size

ing medium

3.flow capacity

ing pressure

5.micron rating

6.material