Length-Measuring System For Pipe Cutter

Specifications

1. Pipe Cutting Length-Measuring System

u  Model: PCMLS-16A/24A/32A

u  Performance features

• This system can be equipped on the Fixed-type Highly-efficient Pipe Cutting & Beveling Machine and Band Saw Machine if required so as to the pipe length-measuring automatically and cut off and the process of length-measuring is unnecessary then.
• A mechanical length-measuring device is adopted in this system to increase the accuracy and reliability. It is PLC control with touch screen; Firstly, the gear teeth driven by a motor move the length measuring arm to the location of the defined length, and the pipe stops when it contacts the contact point on the length measuring arm; then the length that the pipe extending out of the cutter of the beveling machine is just the length for cutting the pipe.

u  Technical parameters

• Pipe diameter applicable: DN50-400 (φ60-426); DN50-600 (φ60-630 ); DN200-800 (φ219-830)
• Line length: 7M or 12 M (or depend on the situation)
• Moving speed: 0.5~14m/min
• Sizing length: 6m (or depends on the situation)
• Length error: ≤±1mm
• Measuring Method: mechanically
• Control System: PLC VF control and Touching Screen with human-machine interface
• Voltage: 380V/ 415V/440V/3Ph-50/60Hz or as per request and pls notice.