Pipe Bevel Machining Work Station (C- Type)

Specifications

         Model:PBMWS-24C

         Performance features

         Basic structures: one 6m container made with special technology, 1 effective pipeline band saw, 1 Fixed-type Radial Pipe End Beveling Machine and 1 Piping Cantilever CraneOption.

         Production capacity: Cutting Speed: ≤2 Min / pipe, Beveling Speed: ≤5 Min / pipe (DN200 SCH40)

         Mobility: Excellent (without limitation of radiation radius when using container as carrier)

         Bevel quality: good

         Application: for cutting the bevels of the pipes with thick wall. 

         Technical parameters

         Pipe diameter applicable: DN50~600(φ60~610)

         Pipe wall thickness applicable: 3~100MM

         Materials applicable: carbon steel, alloy steel, stainless steel and cryogenic steel

         Cutting length: Without limitation

         Bevel shape: , ,  and two Vs

         Limited lifting weight: 1 ton

         Conveying system: each supporting trolley is provided at the materialin and the materialout side of the band saw machine; a crane is used to get the pipes in or take them out; a supporting trolley is provided at the material in/out side of the beveling machine and a crane or cantilever beveling machine is used to get the pipes in or take them out. A Pipe Logistics Transport System for End Beveling Machine with a lifter shall be mounted in front of the beveling machine to automatically adjust the elevation of the pipes so as to bevel the pipes of different diameter if required; a VF conveying system for the sawn material driven by motor can be equipped in front of or at the back of the band saw machine.

         Length-fixing system: a mechanical Length-fixing system could be provided if necessary so as to fix the length of the pipes as well as cut and bevel them with the supporting of the conveying system.