Fixed-type Axial Pipe End Beveling Machine

Specifications

      On-line Performance: designed as per the one line equipment of the production line)

      Beveling Capacity: ≤2Min /pipeline bevel (DN200 SCH40)

      Bevel cutting: cutting a pipe with other equipment such as a band saw and then machining each bevel.

      Bevel quality: good

      Mobility: low

      Application: for cutting large amount of pipes with common wall thickness and beveling the end-shape bevel.

      Price: higher than the Fixed-type Radial Pipe End Beveling Machine but lower than the Fixed-type Highly-efficient Pipe Cutting & Beveling Machine

Technical parameters

      Pipe diameter applicable: DN50600(φ60610) or DN50400(φ60426

      Pipe wall thickness applicable: Single cutter and single cutting 12mm, more cuttings are required if the wall is thicker the all thickness is without limitation.

      Materials applicable: carbon steel, alloy steel, stainless steel and cryogenic steel

      Bevel shape: ,  and two Vs

      Cutting direction: lengthwise

      Cutting displacement: 150mm

      Rev of the principal axis: VF stepless speed adjustment 

      Clamping system: clamping with hydraulic motor screw

      Control system: PLC CNC system

      Length-measuring system: Nil

      Automatic aligning: An end beveling machine conveying system equipped with   lifting and lowering device could be provided if necessary to adjust automatically the center elevation of the pipe, so as to bevel the pipes with different diameters.

      Conveying system: End beveling VF conveying systems driven by motor are equipped at front and rear sides of the beveling machine if necessary.

      Cooling system: Nil

      Hydraulic system: embedded