Coaxial to Optical Digital Audio Converter

Coaxial to Optical Digital Audio Converter

Introduction:

You can Plug your Digital Audio Coax in and get Toslink Digital Optical Out. This can transforms a digital RCA Coaxial (S/PDIF) audio signal to a Digital Toslink Optical signal. This coaxial to optical converter will allow you to connect the coaxial digital audio output from your DVD, cable or satellite receiver to a Toslink digital optical input.

This product will NOT convert ANALOG AUDIO (typically Left & Right - Red and White RCA audio to the Digital Audio Format

Easy Installation:
This audio splitter works with all digital audio device such as HDTV, Blue-ray DVD player, HD cable box, PS3 , HD receivers, home theater systems and all other HD devices. It is all plug and play. Simply plug the power supply, connect the optical toslink(Coax) cable between the optical(Coax) audio source/the end receiving devices and the setup is all done.

Technical Data:
Used 24-bit audio DSP,96KHz Digital receivers,24bit ADC.supports all S/PDIF digital audio transmission for uncompressed PCM, LPCM, Dolby AC-3, Dolby 5.1, Dolby Digital and DTS sound.

1. Power Supply DC/6V 300mA,(outlay 100V~240V broadband convert DC6V 300mA Power)

2. Dimension: 13/16" x 1 7/8" 

Failure Check:

No sound output

A.Check whether the power Optical Audio Splitterpower is on or not

B.Check whether the input channels and output connections

C.Make sure the output device (PS3/XBOX360/DVD Player /HD Player)is set to digital audio output.

D.Make sure digital amplifier power on, and switch to digital audio input,turn on the volume.

Noise

A.Make sure the cable is good

B.Are there unusual audio input

C.Check this noise is weather from digital amplifier or headphones