2013 High Pressure Suspension Grinder Mill Hot Sale

Specifications

High Pressure Suspension Grinder Mill

1.Application of  high pressure suspension grinder mill :

high pressure suspension grinder mill is mainly used to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical and mining. Etc. it can produce powder from various non-flammable and non-explosive mineral materials with mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon,

and so on.

2.Structural characteristics (compared with raymond mill):

1.Special designed, above the plum flower frame, setting a pressure device weighted 1500kg-2000kg. The capacity increased by 10-30% under same power, the grinding pressure from grinding device to the material increased by 800-1500kgf, the fineness of final product can be up to 1000 mesh.

2.The machine is applicable to various kinds of materials, can be used for grinding all kinds of materials less than 9.3 mohs hardness.

3.The dedusting effect is completely up to national standards.

4.The grinding device adopts the high quality and efficient processing technology, multilevel seal guarantee the good sealing effect.

5.The change cycle of grinding roll and grinding rill is long; eliminating the disadvantages of centrifugal crusher that change cycle of vulnerable parts is short.

6.The grinding device use multilevel seal, the seal effect is good.

3.Working principle of high pressure suspension grinde:

First the materials are crushed by the jaw crusher, then the crushed materials are transferred to a hopper by the elevator uniformly. quantltatively and continously by the vibration feeder to the grinding chamber of the main frame for grinding.the grinded particles are brought up by the air current of the blower into the classifier for classification. the particles with the required fineness are brought up by the air current through the pipe into a collector for separation and collection,the finished particles are discharged from a pipe outlet,Because of some moisture contained in the materials to be grinded,the heat resulting from grinding leads to the vaporized air which changes the airflow volume,Moreover,the outside air inhaled from the narrow gaps of the piping connections can increase the volume of air current.Therefor,it is necessary to adjust redundant air pipe between the blower and the main unit for keeping the balance of the air current.Then the redundant air is quided into a cloth bag of a dust cleaner to collect the fine power in the air,Finally, the redundant air is discharged after purfication.

 4.Technicai Specification of High Pressure Suspension Grinder Mill:

High Pressure Suspension Grinder Mill:

If you want to know more detailed information , do feel free to contact us any time !