ZBC90/72 Mining Flameproof Thyristor Charger For 2.5T Battery Locomotive Chargering

Products Description

      ZBC mining explosion-proof silicon controll charger can be applied to environment (such as coal mine) with dangerous explosion gases(methane) and cool dusts, it can be used as the battery for special explosion-proof battery locomotive.

Operating Conditions

A) Altitude does not exceed 1000 m; 
B) The environment temperature:
              The highest temperature + 40 ℃.
              The lowest temperature - 10 ℃;
C) The air relative humidity is not more than 95% (equivalent to an air + 25 ℃);
D) In the coal mine methane and coal dust explosive gas mixture;
E) When there is no enough to corrosive action on metals, and the failure of the insulation gas and steam environment;
F) Without violent vibration and impact, and vertical gradient of no more than 5% of the fixed place;

Products Features

1. Small in size, light weight, stable capability, easy maintenance;

2. The alternating-current part which is easy to produce sparks and the control part formed the independent explosion-proof cavity, to make it become more stable for the control part;

3.  It use the digital module control, high efficiency, stable output characteristic;

4.  Possess the feature of steady flow, can be used for constant-current automatic charge;

5.  Possess the ability to protect it from overloading and being short-circuit;

6.  Have the soft-start function and initial charge.

 Products Pictures 

Maintenance and Repair

A) Explosion-proof surface is the key part of charging equipment, should pay attention to when maintenance should not be changed and damaged.
B) Explosion-proof joint face clean regularly, rust-proof oil, to prevent corrosion and damage and isolation performance.
C) Regularly check whether there is any damage on the lead cable, colloid is aging, found that aging change in time, otherwise it will affect the explosion-proof performance.
D) In the primary loop fast fuse, SCR, diode damage is lack of phase operation, should be timely replacement of damaged electrical components.
E) Flow or short circuit, power device can automatically.At this point, the ammeter no current display, should find fault and the reason, treatment rear can send again.

Production Base

       Shuangli Locomotive Equipment (Shenzhen) Co., Ltd, located in Shenzhen, Guangdong, is specialized in the production of industrial and mineral electric vehicle, its ancillary equipment and accessories. Our main products are mineral over-head line electric vehicle, explosion-proof special battery electric vehicle and accessories.
       We always adhere to technology innovation, establishing credibility, and people oriented policy, and pursue the quality first and customer first tenet. We have established a complete and stable quality assurance system, and gradually form modern management mode. We have passed through ISO9001-2008 quality management system certification, mean while nearly 50 models of products have "MA" and "KA" certification.

Certificates

Contact

* Welcome to contact us with your detailed inquiry, you will be replied within 24 hours.

* You are promised to obtain the best quality, price and service. 

* We'd like to provide samples for your confirm.

Mr Jimmy

Tel:+86-0755-25566833

Fax:+86-0755-25566733
Mobile: +86-15019207852
Skype: yzxuan8911
WhatsApp/Viber: +8615019207852
E_mail: Jimmy-sl(at)