New Tech IP Cloud Alarm For Home Security Not GSM Wierlss Alarm System

Specifications

          New Tech IP Cloud Alarm For Home Security      

                              Not GSM Wierlss Alarm System 

 Product Description:

It's a smarter, more affordable home alarm system for everyone. Remotely arm and disarm the alarm system with the free Andriod /IOS App. If a sensor is triggered, you can be automatically informed with a push or e-mail notification on your Smartphone. 
With the Andriod /IOS App you have full control and see the status of your alarm sensors while you are at home, at work or on vacation.

IP Cloud alarm system allows you to monitor your home with your smartphone. With the built-in alarm features, you can remotely arm, disarm, and monitor various activities with this app.

The easy-to-use Andriod/IOS App gives you control of the IP Cloud Alarm System on the palm of your hand.

FC-300 Cloud based IP Alarm Introduction

Feature:

1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

2) Learn Remote Control and Detector ; Delete Remote Control and Detector.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone,Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor  function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zone, and each zone can

learn 1pc of accessories.

SPECIFICATIONS:

Power supply: 5V/1000MA

Battery: lithium battery 800MA/H

Standby Current: 220MA

Alarm Current: 310MA

Receiving Frequency: 868.35MHz

Emitting frequency: 868.35MHz

Receiving and emitting distance: More than 100metres under open area  

What is Finseen Cloud IP Alarm System?

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system anywhere as long as your phone or tablets connected to the internet.

The central unit of the system is the IP Alarm Scanner(Alarm Host/Panel).

Installation

Plug and Play, easy learn the detectors and easy operate on APP

Alarm Zone:

There is 99 alarm wireless zones in total for alarm panel.

00   : Wireless Remote control (10pcs in total)

01-19 : 24hours zone (19 wireless zone in total)

20-59 : Perimeter zone (40 wireless zone in total)

60-99 : Motion zone (40 wireless zone in total)

Main Features

Operation introduction:

1) Arm/Disarm:

There are 2 way to Arm/Disarm: set by wireless remote control and Internet control   

Away arm/Home arm: When alarm panel receive “Away Arm” or “Home arm” command, the buzzer and loudspeaker will sound “di” to show arm successfully.

If enable arm delay, go into arm delaying status, the buzzer will sound “di” one time each second.

When arm delay finished, there is long “di---” to show arm successfully, and the blue light flash slowly at rate of flash one time each 3seconds.

Disarm: When alarm panel received command for “Disarm”, then the buzzer and loudspeaker will “di” for 2times.

       Blue light keep on when with external power.

       Blue light off when without external power

2) Set the system parameter (Please reference Communication protocol )

Set though Internet: Arm delay, Alarm delay, upload Status of Intelligent door sensor open or closed, siren start or closed.

Scope for Arm delay: 0-59seconds

Scope for Alarm delay: 0-59seconds

3) Wireless learning or deleting

Learning method: Internet control

When alarm panel received learning command, Red light will keep on, and active wireless detector or remote control.

The wireless learning time is 30seconds:

If learned successfully, the Red light will flash quickly for 5seconds, and buzzer will sound “di” for 5times at same rate as Red light flashing.

If learned unsuccessfully, the Red light off, and buzzer will sound “di-” as long as 1.5seconds.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------

4) Alarm

When active alarm by Remote control or wireless detector trigger, if alarm delay is 0second,then alarm delay is more than 0second, and alarm panel will go into alarm delay status, and the buzzer will sound “di” one time each second.

When alarm delay finished, it will go into alarm status, and blue light will flash quickly.

And alarm time is 2seconds.

And the alarm panel can be active emergency alarm through Internet.

5) Intelligent zone function:

If there is one zone of wireless zone1-99 is set as intelligent door sensor, and enable function of Intelligent door sensor for status of open and close uploading, then the status of intelligent door sensor will be uploaded to Internet separately.

6) Power on and Low voltage

A.Power on

When external power is cut off for 8seconds, blue light off under status of disarm, and upload power cutting off status to Internet.

When the alarm panel recover external power on, blue light on under status of disarm, and upload power recovery status to Internet.

B. Battery

    When low voltage of battery keep for 8seconds, blue light keep on, and upload status of battery low voltage to Internet.

    When low voltage of battery recovery more than 8seconds,blue light off, and upload status of low voltage recovery status to Internet.

7) Upload status of low voltage of accessories, and tamper-proof

   When alarm panel received command for detector low voltage or Tamper-proof triggered, the alarm panel will upload detector low voltage or Tamper-triggered information to Internet.

8) Function of Periodic upload

Alarm panel will upload signal of system working normal to Internet.

Packing for Finseen 868mhz Cloud IP Alarm System: 

1 set/gift box, 6 boxes/carton

Carton Size:  49cm*30.5cm*22.5cm

Volume Weigh for 1 Carton: 7kg

Standard Kits consist of:

1 pc of Alarm Host,

1pc of PIR Detector,

1pc of Door Sensor,

1pc of Remote Control,

1pc of Lan Cable,

1pc of Power Supply.

We specialize in home alarm system, home security system, home automation product. Cloud based IP alarm, IP Intruder Alarm, IP Intrusion Home Alarm, Smart APP IP Alarm , IP-Enable Network Alarm, TCP/IP Connection Burglar Alarm, IP Wireless Burglar Alarm, FSK 868mhz Alarm are our Hot Product.

After-sales service

1. Service principle

1) Finseen provides easy,reliable, speedy service to all Allarm products under our warranty.

2) The warranty lasts for 24 months from the date of shipment.

3) The product warranty does not cover the quality problems of product which are caused by natural disasters or human error such as the damage caused by high voltage. Customers need to pay maintenance costs for the damages caused by natural disasters or human error. We provide maintenance of products which are within the warranty period.

2. Service Promise

What we offer: We will replace products afflicted with manufacturing defects within 30 days of purchase; we will also repair alarm free of charge within 24 months of purchase if problems develop with normal use; and finally our limited lifetime warranty( if repair is required after 24 months from the date of purchase, we will charge for parts. The total repair fee is according to the cost of the replaced materials.

1. What is Finseen Cloud IP Alarm System?

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tablets connected to the internet.

The central unit of the system is the IP Alarm Scanner(Alarm Host/Panel).

2. What iOS devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Iphone or Ipad which is with iOS 5.0 above.

3. What Android devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Android 2.3 above.

4.   How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

5.   How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

6.  How do I add/enroll new sensors after the installation?

  Ensure the system under “disarm”mode,”

- Go to the menu ´Device’ in the IP app

- Select ‘+´ to add Device

- Select the appropriate device illustrated.

- Press ´Enroll´ and follow the instructions in the Video. 

- Wait for the confirmation from the server.

- After enroll, edit the location name of the device.

- Done…