IP- Enabled Network Alarm for Family and Property

Finseen New Cloud IP Technology Home Alarm

IP- Enabled Network Alarm for Family and Property

What is Finseen Cloud IP Alarm System?

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tablets connected to the internet.

 APP Interface

Main Features

Specification

Standard Kits

1.  What is Finseen Cloud IP Alarm System?

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tablets connected to the internet.

The central unit of the system is the IP Alarm Scanner(Alarm Host/Panel).

2.   How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

3.   How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

4.   How do I add/enroll new sensors after the installation?

Ensure the system under “disarm”mode,”

-  Go to the menu ´Device’ in the IP app

-  Select ‘+´ to add Device

-  Select the appropriate device illustrated.

-  Press ´Enroll´ and follow the instructions in the Video.

-  Wait for the confirmation from the server.

-  After enroll, edit the location name of the device.

-  Done…

5.  How can I know if the enroll sensors is successful or fail?

If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.

But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.

1 set/gift box,
6 gif box/carton