2015 New Burglary Alarm System IP Cloud Home Security not GSM alarm

New IP Cloud Alarm ,Instruder Home Alarm ,transmitter receiver 868 mhz---Free charge

IP Cloud Alarm protect your family against intruders with wireless home security systems

Getting and installing an alarm system in your home has never been so easy. Choose the Wireless Security Kit you want to start with and the additional components to cover up your entire premises

Wireless Home Security systems have been around for decades, but they are not all created equal; especially the do-it-yourself models. These have been weak in the past with faulty alarms, insufficient power supplies, and a general lack or expertise. 

However, our products suggested below will bring you an easy installation, ease of operation, and full coverage for whatever application you chose to use it for. These wireless systems are great for the home, office,  or even a college dorm room if you need it.

MOBILE APPS KEEP YOU IN CONTROL, FROM ANYWHERE

love the app that I have on my phone. I actually know anything that goes on with my apartment.

• Arm of disarm your system from anywhere
• Monitor your home around-the-clock
• Get instant notifications of triggered alerts

SIMPLE SETUP, COMPLEX PROTECTION

Easy install, easy to use, great customer service.

• Self-installation in less than 30 minutes
• No wires to tangle, no holes to drill
• No technician visit
• Components connect instantly

A SMASHED CONTROL PANEL WON’T DISARM YOUR SYSTEM

“Fantastic system that is based cloud ip alarm ahead of other security systems.”

Wireless equipment Cloud platform host. It is responsible for receiving the radio signal from the detector and the remote control, or the like, and sends a signal to the cloud platform; cloud platform accept commands to operate.

Feature:

1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

2) Learn Remote Control and Detector ; Delete Remote Control and Detector.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone,Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor  function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zone, and each zone can

learn 1pc of accessories.

LED light:
Light Off: without external power under Status of disarm.
Blue light keep on: external power working normal, under Status of disarm.
Blue light flash slowly: Status for Arm (slowly flash one time each 3seconds)
Blue light flash quickly: Status for Alarm (flash one time each 0.6second)
Red light on: Status of learning
Red light flash slowly: (Flash for 5times each second) learning successfully.
Yellow Light off: power of battery is enough
Yellow light on: Low voltage for battery

Alarm Zone:
There is 100 alarm wireless zone in total for alarm panel.
00   : Wireless Remote control (10pcs in total)
01-19 : 24hours zone (19 wireless zone in total)
20-59 : Perimeter zone (40 wireless zone in total)
60-99 : Motion zone  (40 wireless zone in total)

The FC - 300 contains a standard set of machine:

A 868 MHZ alarm host

A 868 MHZ infrared detector

A 868 MHZ magnetic door

A 868 MHZ remote control

1 Internet line

1 to match the power adapter alarm host

FAQ

1. What iOS devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Iphone or Ipad which is with iOS 5.0 above.

2. What Android devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Android 2.3 above.

3.   How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

4.   How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

5.  How do I add/enroll new sensors after the installation?

Ensure the system under “disarm”mode,”

- Go to the menu ´Device’ in the IP app

- Select ‘+´ to add Device

- Select the appropriate device illustrated.

- Press ´Enroll´ and follow the instructions in the Video.

- Wait for the confirmation from the server.

- After enroll, edit the location name of the device.

- Done…

6. How can I know if the enroll sensors is successful or fail?

If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.

But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.

7. How many sensors in maximum that I can enroll in total?

You can enroll in max.10 pcs Remote controls, 19 pcs Smoke detector or gas detector, 40 pcs Door /Window sensor and 40 pcs Motion detectors.

8. How can I change the password?

Go to “Set up ”profile, and choose “ change password”.

Then enter the old password, followed by enter a new password. Repeat the new password to ensure correct entry.