Smart Home Security Alarm IP Cloud Alarm 868mhz

Finseen Cloud Technology IP Alarm System

2015 NEW ! ip cloud home alarm with App 

Support Andriod and IOS APP !!!

Cloud IP Alarm home security. Complete peace of mind for you and your family

It’s human nature to protect the people and possessions we hold dear, and everyone enjoys feeling safe and secure. At Finseen we understand this better than most.

Burglaries are an unfortunate fact of life and being broken into is a traumatic experience. But while the loss of your possessions (especially those with sentimental value) is deeply upsetting, it’s the emotional trauma of a break-in that can be even harder to get over.

Not only are we experts in home security alarms but we’re people too. And we can help you avoid the emotional stress caused by being a victim of burglary by protecting your property, thanks to a range of Finseen IP Cloud Alarm home security systems.

Finseen main specilize in Cloud based IP Alarm,IP Intrusion Home Alarm,Smart APP IP Alarm ,IP-Enabled Network Alarms,TCP/IP connection burglar Alarm

FC-300 Cloud based IP Alarm Introduction

Feature:

1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

2) Learn Remote Control and Detector ; Delete Remote Control and Detector.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone,Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor  function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zone, and each zone can

learn 1pc of accessories.

LED light:
Light Off: without external power under Status of disarm.
Blue light keep on: external power working normal, under Status of disarm.
Blue light flash slowly: Status for Arm (slowly flash one time each 3seconds)
Blue light flash quickly: Status for Alarm (flash one time each 0.6second)
Red light on: Status of learning
Red light flash slowly: (Flash for 5times each second) learning successfully.
Yellow Light off: power of battery is enough
Yellow light on: Low voltage for battery

Alarm Zone:

There is 100alarm wireless zone in total for alarm panel.
00: Wireless Remote control (10pcs in total)
01-19: 24hours zone (19 wireless zone in total)
20-59: Perimeter zone (40 wireless zone in total)
60-99: Motion zone (40 wireless zone in total)

  Easy Operate---Truly Plug & Play

Just link to the Internet then operate everything such as arm and disarm on your phone or tablet and IP Cloud Alarm will send yo notification via your phone or email.

Packaging & Shipping

 Packing for Finseen 868mhz Cloud IP Alarm System: 

1 set/gift box, 6 boxes/carton

Carton Size:  49cm*30.5cm*22.5cm

Volume Weigh for 1 Carton: 7kg

Standard Kits consist of:

1 pc of Alarm Host,

1pc of PIR Detector,

1pc of Door Sensor,

1pc of Remote Control,

1pc of Lan Cable,

1pc of Power Supply.

 1.What iOS devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Iphone or Ipad which is with iOS 5.0 above.

2.       What Android devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Android 2.3 above.

3.      How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

4.      How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

5. How do I add/enroll new sensors after the installation?

Ensure the system under “disarm”mode,”

-  Go to the menu ´Device’ in the IP app

-  Select ‘+´ to add Device

-  Select the appropriate device illustrated.

-  Press ´Enroll´ and follow the instructions in the Video.

-  Wait for the confirmation from the server.

-  After enroll, edit the location name of the device.

-  Done…