Home Automation Security Alarm Cloud based IP Alarm

Wireless 868mhz Wireless IP House Alarm - Finseen Smart Solution 
 
The Finseen Smart alarm is our brand new 868Mhz cloud based wireless house alarm, offering the absolute latest in alarm technology. 
This alarm is so simple to setup, connect the Finseen Smart alarm to your router, download the app onto your iPhone or Android phone and away you go. 

The best thing about this alarm is all alarm notifications are sent via your existing broadband network, no SIM card is required as with other house alarms,

that means no cost to receive alerts and no making sure your SIM card is still active.
           
Package Contents 
 
1 x 868Mhz Finseen Smart Alarm Host
1 x Wireless pet immune PIR’s
1 x Wireless door/window contacts
1 x Wireless key fobs with built-in panic button
Batteries included for all sensors
 
 
Features:
 
  
868Mhz frequency – The 868Mhz is used exclusively by high end house alarm systems, unlike the more common 433Mhz which is a very busy frequency increasing risk of false alarms or interference
 
Cloud based alarm monitoring – this means your alarm is being monitored all the time, if there is an activation, you will get an alert on your phone instantly
 
Breakthrough technology – We are the only supplier for cloud based ip monitored alarm in the China.
 
Full APP control – This is a fully app controlled alarm system, all programming is done through the app, as is all the alerts. 

Pet immune PIR’s – All supplied PIR’s are pet friendly up to 18KG and 60cm in height
 
Full 24 month warranty – All of our products come with a 24 month warranty, any problems we will dealt with within 24hours through our cloud servers by our team in European and China.
 
Complete wireless setup - All sensors are completely wireless, no need for messy wiring or complicated installation. All batteries are supplied
 
Completely personalised setup – Every sensor on the system can be named meaning you can state the exact location in your property where that sensor is installed. 

This is fantastic because instead of getting an alert saying ‘alarm zone 03’, the Finseen Smart alarm would say ‘alarm kitchen PIR’ for example. 
 
Name your key fob users – Each key fob can be assigned to a user so that you know who has armed and disarmed the system and at what time. 

For example, Key fob 1 could belong to John, Key fob 2 to Mary, etc
 
Protection from power cuts - Control panel comes fitted with an internal rechargeable NI-HM backup battery, allowing the panel to run for up to 10 hours without mains power. 

Also get an alert when there is a power cut
 
Full alarm history available - see what zone, date and time historic activations occurred.
 
Will support up to 99 wireless sensors - this can be made up of PIR’s, door contacts, smoke detectors or other sensors
 
Supports up to 10 wireless key fobs
 
Supports partial arming and entry and exit delays
 
Alarm alerts – The app can be installed on as many devices as required, simply enter your panels unique ID and passcode.

When the alarm triggers, your phone will sound like a siren!

FAQ

When you’re trying to find a home alarm system to protect your house and family, there are lots of options, and it’s easy to get overwhelmed. Check out the Finseen home alarm system FAQ below and get to the heart of what you need to know about home Cloud IP alarm.

1.       What is Finseen Cloud IP Alarm System?

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tablets connected to the internet.

The central unit of the system is the IP Alarm Scanner(Alarm Host/Panel).

2.       What iOS devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Iphone or Ipad which is with iOS 5.0 above.

3.       What Android devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Android 2.3 above.

4.       How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

5.       How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

6. How do I add/enroll new sensors after the installation?

Ensure the system under “disarm”mode,”

-  Go to the menu ´Device’ in the IP app

-  Select ‘+´ to add Device

-  Select the appropriate device illustrated.

-  Press ´Enroll´ and follow the instructions in the Video.

-  Wait for the confirmation from the server.

-  After enroll, edit the location name of the device.

-  Done…

7. How can I know if the enroll sensors is successful or fail?

If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.

But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.

8. How many sensors in maximum that I can enroll in total?

You can enroll in max.10 pcs Remote controls, 19 pcs Smoke detector or gas detector, 40 pcs Door /Window sensor and 40 pcs Motion detectors.

9. How can I change the password?

Go to “Set up ”profile, and choose “ change password”.

Then enter the old password, followed by enter a new password. Repeat the new password to ensure correct entry.