IP cloud alarm home automation network wireless Finseen FC-300

2) Learn /delete Remote Control and Detector by yourself.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergency Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on,Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone, Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zones, and each zone can learn 1pc of accessories.

Receiving/ Emitting Frequency: 868.35MHz

Receiving/ emitting distance: >100m under open area

00: Wireless Remote control (10pcs in total)

01-19 : 24hours zone (19 wireless zone in total)

20-59 : Perimeter zone (40 wireless zone in total)

60-99 : Motion zone (40 wireless zone in total)

4.Operation introduction:

1) Arm/Disarm:

 There are 2 way to Arm/Disarm: set by wireless remote control and Internet control

 Away arm/Home arm: When alarm panel receive “Away Arm” or “Home arm” command, the buzzer and loudspeaker willsound “di” to show arm successfully.

 If enable arm delay, go into arm delaying status, the buzzer will sound “di” one time each second.

When arm delay finished, there is long “di---” to show arm successfully, and the blue light flash slowly at rate of flash onetime each 3seconds.

 Disarm: When alarm panel received command for “Disarm”, then the buzzer and loudspeaker will “di” for 2times.

 Blue light keep on when with external power.

 Blue light off when without external power

 2) Set the system parameter (Please reference Communication protocol)

 Set though Internet: Arm delay, Alarm delay, upload Status of Intelligent door sensor open or closed, siren start or closed.

 Scope for Arm delay: 0-59seconds

 Scope for Alarm delay: 0-59seconds

 3) Wireless learning or deleting

 Learning method: Internet control

       When alarm panel received learning command, Red light will keep on, and active wireless detector or remote control.  The wireless learning time is 30seconds:

If learned successfully, the Red light will flash quickly for 5seconds, and buzzer will sound “di” for 5times at same rate as Red light flashing.

If learned unsuccessfully, the Red light off, and buzzer will sound “di-” as long as 1.5seconds.

4) Alarm

       When active alarm by Remote control or wireless detector trigger, if alarm delay is 0second,then alarm delay is more than 0second, and alarm panel will go into alarm delay status, and the buzzer will sound “di” one time each second.

When alarm delay finished, it will go into alarm status, and blue light will flash quickly.

And alarm time is 2seconds.

5) Intelligent zone function:

If there is one zone of wireless zone1-99 is set as intelligent door sensor, and enable function of Intelligent door sensor for status of open and close uploading, then the status of intelligent door sensor will be uploaded to Internet separately.

 6) Power on and Low voltage

A.Power on

When external power is cut off for 8seconds, blue light off under status of disarm, and upload power cutting off status to Internet.

When the alarm panel recover external power on, blue light on under status of disarm, and upload power

recovery status to Internet.

 B. Battery

When low voltage of battery keep for 8seconds, blue light keep on, and upload status of battery low voltage to Internet.

When low voltage of battery recovery more than 8seconds,blue light off, and upload status of low voltage

recovery status to Internet.

7) Upload status of low voltage of accessories, and tamper-proof

When alarm panel received command for detector low voltage or Tamper-proof triggered, the alarm panel will upload detector low voltage or Tamper-triggered information to Internet.

8) Function of Periodic upload

Alarm panel will upload signal of system working normal to Internet.

 9) IP Alarm APP interface:

We specialize in home alarm system, home security system, home automation product. Cloud based IP alarm, IP Intruder Alarm, IP Intrusion Home Alarm, Smart APP IP Alarm , IP-Enable Network Alarm, TCP/IP Connection Burglar Alarm, IP Wireless Burglar Alarm, FSK 868mhz Alarm are our Hot Product.

After-sales service

1. Service principle

1) Finseen provides easy,reliable, speedy service to all Allarm products under our warranty.

2) The warranty lasts for 24 months from the date of shipment.

3) The product warranty does not cover the quality problems of product which are caused by natural disasters or human error such as the damage caused by high voltage. Customers need to pay maintenance costs for the damages caused by natural disasters or human error. We provide maintenance of products which are within the warranty period.

2. Service Promise

What we offer: We will replace products afflicted with manufacturing defects within 30 days of purchase; we will also repair alarm free of charge within 24 months of purchase if problems develop with normal use; and finally our limited lifetime warranty( if repair is required after 24 months from the date of purchase, we will charge for parts. The total repair fee is according to the cost of the replaced materials.  

Finseen Group Company Limited is a global alarm solution provider based in Shenzhen,China.

Now our products Cloud based IP Alarm system have been proved highly successful wherever they have been marketed in North American, Europe and Asia.

Our professional &qualified R&D teams have been applying state-of-the-art technology to our quality products, and have enabled us to take the lead over our competitors in the designs and innovations. Finseen Cloud based IP Alarm system are manufactured in modern lines and quality of produdcts through strict control of each stage, each stage of the production process to ensure quality standards in Europe(CE).

The main thing that has helped us with a competitive advantage in the market.

Finseen’s philosophy is to provide value to our customers through quality products, cutting-edge innovation,world-class service, and ethical practices.

We offer our clients a unique design service. Customers is crucial to the survival of the enterprice.

1. What is Finseen Cloud IP Alarm System?

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tablets connected to the internet.

The central unit of the system is the IP Alarm Scanner(Alarm Host/Panel).

2. What iOS devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Iphone or Ipad which is with iOS 5.0 above.

3. What Android devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Android 2.3 above.

4.   How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the “IP Alarm” app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

5.   How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

6.  How do I add/enroll new sensors after the installation?

Ensure the system under “disarm”mode,”

- Go to the menu ´Device’ in the IP app

- Select ‘+´ to add Device

- Select the appropriate device illustrated.

- Press ´Enroll´ and follow the instructions in the Video.

- Wait for the confirmation from the server.

- After enroll, edit the location name of the device.

- Done…

7. How can I know if the enroll sensors is successful or fail?

If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.

But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.

8. How many sensors in maximum that I can enroll in total?

You can enroll in max.10 pcs Remote controls, 19 pcs Smoke detector or gas detector, 40 pcs Door /Window sensor and 40 pcs Motion detectors.

9. How can I change the password?

Go to “Set up ”profile, and choose “ change password”.

Then enter the old password, followed by enter a new password. Repeat the new password to ensure correct entry.