2014 Hot Sale With APP Android and Iphone IP Cloud Wireless Home Alarm Security System Fc-300

Specifications

FC-300 Cloud based IP Alarm Introduction

Feature:

1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

2) Learn Remote Control and Detector ; Delete Remote Control and Detector.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone,Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor  function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zone, and each zone can

learn 1pc of accessories.

Specification:

Power supply: 5V/1000MA

Battery: lithium battery 800MA/H

Standby Current: 220MA

Alarm Current: 310MA

Receiving Frequency: 868.35MHz

Emitting frequency: 868.35MHz

Receiving and emitting distance: More than 100metres under open area

Alarm Zone:

There is 100 alarm wireless zone in total for alarm panel.

00   : Wireless Remote control (10pcs in total)

01-19 : 24hours zone (19 wireless zone in total)

20-59 : Perimeter zone (40 wireless zone in total)

60-99 : Motion zone (40 wireless zone in total)

Operation introduction:

1) Arm/Disarm:

There are 2 way to Arm/Disarm: set by wireless remote control and Internet control

Away arm/Home arm: When alarm panel receive “Away Arm” or “Home arm” command, the buzzer and loudspeaker will sound “di” to show arm successfully.

If enable arm delay, go into arm delaying status, the buzzer will sound “di” one time each second.

When arm delay finished, there is long “di---” to show arm successfully, and the blue light flash slowly at rate of flash one time each 3seconds.

Disarm: When alarm panel received command for “Disarm”, then the buzzer and loudspeaker will “di” for 2times.

       Blue light keep on when with external power.

       Blue light off when without external power

2) Set the system parameter (Please reference Communication protocol )

Set though Internet: Arm delay, Alarm delay, upload Status of Intelligent door sensor open or closed, siren start or closed.

Scope for Arm delay: 0-59seconds

Scope for Alarm delay: 0-59seconds

3) Wireless learning or deleting

Learning method: Internet control

When alarm panel received learning command, Red light will keep on, and active wireless detector or remote control.

The wireless learning time is 30seconds:

If learned successfully, the Red light will flash quickly for 5seconds, and buzzer will sound “di” for 5times at same rate as Red light flashing.

If learned unsuccessfully, the Red light off, and buzzer will sound “di-” as long as 1.5seconds.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------

4) Alarm

When active alarm by Remote control or wireless detector trigger, if alarm delay is 0second,then alarm delay is more than 0second, and alarm panel will go into alarm delay status, and the buzzer will sound “di” one time each second.

When alarm delay finished, it will go into alarm status, and blue light will flash quickly.

And alarm time is 2seconds.

And the alarm panel can be active emergency alarm through Internet.

5) Intelligent zone function:

If there is one zone of wireless zone1-99 is set as intelligent door sensor, and enable function of Intelligent door sensor for status of open and close uploading, then the status of intelligent door sensor will be uploaded to Internet separately.

6) Power on and Low voltage

A.Power on

When external power is cut off for 8seconds, blue light off under status of disarm, and upload power cutting off status to Internet.

When the alarm panel recover external power on, blue light on under status of disarm, and upload power recovery status to Internet.

B. Battery

   When low voltage of battery keep for 8seconds, blue light keep on, and upload status of battery low voltage to Internet.

       When low voltage of battery recovery more than 8seconds,blue light off, and upload status of low voltage recovery status to Internet.

7) Upload status of low voltage of accessories, and tamper-proof

   When alarm panel received command for detector low voltage or Tamper-proof triggered, the alarm panel will upload detector low voltage or Tamper-triggered information to Internet.

8) Function of Periodic upload

Alarm panel will upload signal of system working normal to Internet.

1. What's the difference between IP Cloud Alarm and GSM alarm system?
------ The GSM Burglar alarm system – can edit SMS and alarm information yourself by phone.

-------IP Cloud Alarm system—Do not need to charge your phone, just link to the Internet, then operate everything such as arm and disarm on your phone or tablet, and the IP Cloud Alarm will send you notification via your phone or email.

2. Why us?

• We are one of the two manufacturers who is the first one to produce this new product of the world
• We put millions of dollars on research and develop it with a foreign professional team together
• We have built 5 Cloud Server among 5 Countries of the world, 2 are in Europe, the other are in America, Singapore and China, more Cloud Servers can be built in the future.